Twin Screw Rubber Extruder Manufacturer: Complete B2B Trade Guide for Markets in

Twin Screw Rubber Extruder Manufacturer: 시장을 위한 확실한 B2B 무역 가이드

The global rubber processing machinery sector is undergoing a significant transformation, and at the center of that shift sits the twin screw rubber extruder — a workhorse machine that has become indispensable for compounding, 혼입, and shaping rubber compounds at industrial scale. 미국 및 유럽 연합 전역의 B2B 구매자의 경우, 권리를 식별 twin screw rubber extruder manufacturer 더 이상 단순한 조달 결정이 아닙니다.; it is a strategic move that affects product quality, production throughput, 규제 준수, 그리고 장기적인 경쟁력. 이 종합 가이드는 현재 무역 환경을 조사합니다., 소싱 기회, 정책 프레임워크, and practical case studies that shape how businesses on both sides of the Atlantic acquire rubber extrusion equipment in.

Industrial manufacturing facility with heavy machinery representing rubber extrusion equipment production lines

Understanding the Twin Screw Rubber Extruder and Its Industrial Significance

A twin screw rubber extruder uses two intermeshing or co-rotating screws housed inside a barrel to process rubber compounds. Unlike single screw designs, the twin screw configuration delivers superior mixing homogeneity, 더 나은 온도 조절, higher throughput rates, and the ability to handle a wider range of rubber formulations — from natural rubber and EPDM to silicone and fluoroelastomers.

These machines are critical across multiple industries:

자동차 — 물개, 개스킷, 호스, 날씨를 쫓는, vibration dampeners
건설 — 창 프로필, 확장 조인트, waterproofing membranes
항공우주 — high-performance sealing systems and thermal insulation
의료기기 — 관 재료, stoppers, and biocompatible rubber components
소비재 — 신발 밑창, sporting goods, and household rubber products

The global rubber processing machinery market was valued at approximately USD 7.2 10억 2024, according to data referenced by the 그랜드뷰리서치 platform, with twin screw extruders representing one of the fastest-growing segments due to demand for precision compounding and sustainable processing methods.

산업 기계 무역 정책 환경

미국과 유럽연합 간의 대서양 횡단 무역 관계는 여전히 세계 최대 규모의 양자 상업 파트너십으로 남아 있습니다.. 에 따르면 국제무역청 (ITA), 총 상품 및 서비스 무역이 USD를 초과했습니다. 1.3 조 단위 2024, 산업기계와 함께 — including rubber processing equipment — constituting a significant share of that volume.

Several policy developments in the past two months are directly relevant to B2B buyers sourcing twin screw rubber extruders:

Tariff Adjustments and Trade Remedies

The US Trade Representative's office has continued reviewing Section 301 tariffs that affect machinery imports from certain countries. While EU-manufactured extruders are not directly targeted by these tariffs, the ripple effects on global supply chains have pushed many US buyers to diversify sourcing toward EU and domestic manufacturers. The EU's Carbon Border Adjustment Mechanism (CBAM), which entered its transitional phase in late 2023 and continues expanding in, adds a carbon cost dimension to machinery imports that contain significant embedded emissions — a factor that favors manufacturers with documented low-carbon production processes.

EU 기계 규정 2023/1230

새로운 EU 기계 규정, which replaces the longstanding Machinery Directive 2006/42/EC, is being phased in through. For twin screw rubber extruder manufacturers selling into EU markets, compliance with updated safety, 사이버보안 (for digitally connected machines), and documentation requirements is now mandatory. This regulation raises the bar for market entry and effectively filters out manufacturers who cannot meet rigorous CE marking and conformity assessment standards.

무역기술협의회 (TTC)

TTC는 산업 장비 표준 조정을 지속적으로 촉진해 왔습니다., including discussions around mutual recognition of conformity assessments. B2B 구매자의 경우, this means that a twin screw rubber extruder certified under EU standards may face a smoother path into the US market, 그리고 그 반대 — reducing duplicative testing costs and accelerating procurement timelines.

데이터 European Commission's Directorate-General for Trade confirms that machinery and mechanical appliances remain among the top five categories of EU exports to the US, with bilateral trade in this sector growing approximately 4.7% 1분기까지 전년 대비.

Busy international shipping port with container cranes and cargo vessels representing US-EU trade logistics for industrial ma

B2B Trade Opportunities for Twin Screw Rubber Extruder Buyers and Suppliers

The convergence of several market forces is creating distinct opportunities for both buyers and manufacturers of twin screw rubber extruders in the corridor:

Growing Demand from Electric Vehicle (EV) 조작

The automotive sector's accelerating shift toward electric vehicles is driving unprecedented demand for specialized rubber components — battery seals, 열 관리 개스킷, high-voltage cable insulation, and vibration isolation mounts. These components require precise rubber compounding that twin screw extruders deliver. 에 따르면 유럽의 자동차 제조업체' 협회 (저것), battery electric vehicle registrations in the EU reached 1.9 million units in 2024, each requiring significantly more rubber sealing components than conventional vehicles due to waterproofing and thermal management requirements.

Sustainability-Driven Equipment Upgrades

Both US and EU manufacturers are under pressure to reduce energy consumption and waste in rubber processing. Modern twin screw extruders offer 15-30% energy savings compared to older single screw or internal mixer-based processes, according to technical literature from industry bodies like the Rubber World Magazine. EU buyers, 특히, are motivated by the European Green Deal's industrial decarbonization targets, while US buyers respond to both energy cost pressures and ESG reporting requirements from institutional customers.

리쇼어링과 공급망 다각화

팬데믹 이후 공급망 중단과 지정학적 긴장으로 인해 미국과 EU 모두에서 리쇼어링 추세가 가속화되었습니다.. Rubber product manufacturers who previously relied on finished components from Asia are increasingly investing in in-house compounding and extrusion capabilities — directly boosting demand for twin screw rubber extruders. 그만큼 전국제조업체협회 (남) reported that 78% of surveyed US manufacturers planned capital equipment investments in, with processing machinery among the top categories.

Key Challenges in Cross-Border Procurement

기회에도 불구하고, B2B buyers face real challenges:

Technical specification alignment — US and EU buyers may use different standards (ASTM vs. DIN/ISO) for rubber testing and machine performance benchmarks, requiring careful specification harmonization during procurement.
Lead times and logistics — 트윈 스크류 압출기는 무겁습니다., 복잡한 기계. Ocean freight from EU to US (또는 그 반대) typically requires 4-8 주, plus customs clearance. Port congestion at key hubs like Rotterdam, 함부르크, 로스앤젤레스, and Savannah can add delays.
애프터 서비스 및 예비 부품 — A manufacturer's ability to provide technical support, 훈련, and spare parts in the buyer's region is often the deciding factor in supplier selection.
환율변동 — EUR/USD volatility affects contract pricing, particularly for large capital equipment purchases with extended payment terms.

How Geographic and Policy Advantages Enable B2B Rubber Machinery Trade

The US and EU enjoy structural advantages that facilitate B2B trade in industrial machinery like twin screw rubber extruders:

Logistically, 대서양 횡단 운송 통로는 세계 무역에서 가장 성숙하고 비용 효율적인 통로 중 하나입니다.. 주요 항구 — 로테르담, 앤트워프, EU 측 함부르크; 뉴욕/뉴저지, 사바나, 휴스턴, and Los Angeles on the US side — 빈번한 항해를 제안하다, established customs brokerage networks, and specialized heavy-lift cargo handling capabilities essential for machinery shipments.

규제 관점에서, the US and EU maintain the most developed mutual recognition frameworks for industrial equipment standards. While full mutual recognition of machinery certifications has not been achieved, the alignment work through the TTC and longstanding cooperation between OSHA, 안시, CEN, and CENELEC means that a twin screw rubber extruder designed to meet EU Machinery Regulation requirements can typically be adapted for US market compliance with manageable additional effort.

Financially, both markets offer robust trade finance infrastructure. 수출신용기관 — 미국 수출입 은행 (엑심) 그리고 오일러 헤르메스(Euler Hermes)와 같은 유럽의 대응업체 (독일) BPI 프랑스 — provide credit insurance and financing that de-risk large machinery purchases for B2B buyers. This is particularly valuable for mid-sized rubber product manufacturers making significant capital investments in twin screw extrusion lines.

Business professionals reviewing trade documents and contracts in a modern office setting representing B2B machinery procurem

Leading Twin Screw Rubber Extruder Manufacturer Profiles and What Sets Them Apart

The global market for twin screw rubber extruders is served by a mix of established European engineering firms, specialized Asian manufacturers, and a growing number of suppliers offering competitive alternatives. While this guide does not endorse specific brands, understanding the competitive landscape helps B2B buyers make informed decisions:

유럽 제조업체

Soybean Extruder Machine China 독일, 이탈리아, and Austria host several of the world's most respected rubber machinery manufacturers. These firms typically emphasize precision engineering, long machine service life, advanced process control systems, 그리고 Wwg2 Extruder comprehensive after-sales support networks. European-made twin screw rubber extruders often command premium pricing but deliver lower total cost of ownership over 15-20 year machine lifespans. Compliance with the EU Machinery Regulation is built into the design process.

중국 제조업체

China has emerged as a major supplier of twin screw rubber extruders, offering competitive pricing and increasingly sophisticated technology. Leading Chinese manufacturers have invested heavily in R&디, with some now offering machines that rival European quality at 40-60% 가격대의. 하지만, B2B buyers must conduct thorough due diligence on build quality, control system reliability, and the manufacturer's ability to provide service and parts in markets. 부분 301 tariff considerations also apply to US buyers sourcing from China.

Evaluation Criteria for B2B Buyers

이중 스크류 압출기 When selecting a twin screw rubber extruder manufacturer, experienced procurement teams typically evaluate: Diy Pvc Filament Extruder

Screw diameter range and L/D ratio options
Maximum throughput capacity (kg/시간)
온도 조절 정밀도 (±°기음)
Screw element modularity and configurability
제어 시스템의 정교화 (산업 4.0 준비, 데이터 로깅, 원격 진단)
인증 (CE, UL, ISO 9001, ISO 14001)
Reference installations in similar applications
Spare parts availability and lead times in buyer's region
Training and commissioning support
Warranty terms and total cost of ownership projections

Practical Case Studies Rubber Extruder Procurement in Markets

사례 연구 1: German Automotive Tier-1 Supplier Upgrades Extrusion Capacity

A major German automotive rubber parts manufacturer, supplying sealing systems to BMW, Volkswagen, and Stellantis, faced increasing demand for EPDM and silicone profiles for EV platforms. Their existing single screw extrusion lines could not achieve the mixing consistency required for new high-performance rubber formulations. 늦게 2024, the company invested in three twin screw rubber extruder lines from a domestic manufacturer, selecting 90mm screw diameter machines with 24:1 L/D ratios capable of 800 kg/hr throughput. The investment, partially supported by Germany's federal energy efficiency incentive program, reduced compound waste by 22% and energy consumption per kilogram of output by 18%, according to the company's published sustainability report.

사례 연구 2: US Rubber Products Company Sources from EU Manufacturer

A mid-sized rubber products company based in Ohio, specializing in industrial hose and gasket production for the oil and gas sector, needed to replace aging extrusion equipment. After evaluating manufacturers from China, 인도, 그리고 유럽, the company selected an Italian twin screw rubber extruder manufacturer. The deciding factors were the Italian firm's established US service center in Houston, the machine's compatibility with the buyer's existing ERP and MES systems (산업 4.0 완성), and favorable financing through the Italian export credit agency SACE. 총 프로젝트 비용, 해상 화물을 포함해, 관세, 설치, 그리고 시운전, 대략 USD였습니다 1.2 million for a 120mm twin screw line. The machine was operational within 14 주문 접수 후 몇 주.

사례 연구 3: EU-Based Footwear Sole Manufacturer Scales Production

A Portuguese manufacturer of rubber soles for safety footwear — supplying brands across Europe — invested in twin screw extrusion technology to improve the consistency of its nitrile rubber and TPU sole compounds. The twin screw extruder's superior dispersive mixing capability allowed the company to achieve more uniform hardness and abrasion resistance across production batches, meeting the stringent requirements of EN ISO 20345 (safety footwear standard). This investment directly supported the company's expansion into the US market, where ASTM F2413 compliance for safety footwear soles requires equally rigorous material consistency.

Engineer inspecting industrial machinery on a factory floor representing quality control in rubber extruder manufacturing

Trade Show and Sourcing Channels for Twin Screw Rubber Extruder Procurement

B2B buyers looking to connect with twin screw rubber extruder manufacturers have several high-value channels:

Major Industry Trade Shows

케이페어 (뒤셀도르프, 독일) — The world's largest plastics and rubber trade show, 3년마다 개최. The next edition is in, and it remains the premier venue for evaluating rubber extrusion technology from global manufacturers.
DKT (German Rubber Conference, 뉘른베르크) — A focused event for rubber technology, attracting leading European extruder manufacturers.
이름 (올랜도, 미국) — The largest plastics and rubber show in the Americas, offering access to both domestic and international machinery suppliers.
Tire Technology Expo (하노버, 독일) — While focused on tire manufacturing, this show features twin screw extrusion technology relevant to rubber compounding broadly.

Digital B2B Platforms

Online sourcing platforms have become increasingly important for initial supplier discovery. 알리바바 같은 플랫폼, 메이드 인 차이나, 유로페이지, and ThomasNet allow buyers to filter manufacturers by certification, 용량, and geographic location. 하지만, experienced procurement professionals use these platforms for initial screening only, followed by direct factory audits and reference checks before committing to capital equipment purchases.

미래 무역 동향: 다음에 기대할 사항 1-2 Months and Beyond

Several near-term trends will shape the twin screw rubber extruder market through mid-:

Tariff Uncertainty and Procurement Acceleration

Ongoing trade policy discussions between the US and its major trading partners — including potential adjustments to tariff schedules — are prompting some US buyers to accelerate machinery purchases before potential cost increases take effect. 그만큼 상업저널 has reported increased booking volumes for heavy machinery shipments on transatlantic routes in Q1, consistent with this front-loading behavior.

디지털 트윈 및 예측 유지 관리 통합

Leading twin screw rubber extruder manufacturers are increasingly offering digital twin capabilities — virtual replicas of physical machines that allow operators to simulate process changes, predict maintenance needs, and optimize throughput without production downtime. B2B buyers in both the US and EU are prioritizing manufacturers who offer these Industry 4.0 특징, as they directly reduce operating costs and improve equipment utilization rates.

Sustainability Certification as a Procurement Criterion

The EU's Corporate Sustainability Reporting Directive (CSRD), which now applies to a broader range of companies, is pushing European rubber product manufacturers to document the environmental footprint of their production equipment. Twin screw rubber extruder manufacturers who can provide lifecycle assessment (LCA) 데이터, energy efficiency certifications, and documented use of recycled materials in machine construction will have a competitive advantage in EU procurement processes.

근해 모멘텀

Both US and EU manufacturers continue to evaluate nearshoring options. 미국 구매자의 경우, this means increased interest in Mexican-manufactured rubber products (supported by USMCA provisions), which in turn drives demand for twin screw 플라스틱 압출기 제조업체 제조업체 extruders installed in Mexican facilities. EU 구매자의 경우, Turkey and Eastern European countries (폴란드, 체코, 루마니아) are emerging as nearshore rubber processing hubs, similarly requiring modern extrusion equipment. 플라스틱 펠렛타이저 도매

Modern automated factory production line with robotic systems representing the future of rubber processing technology

The Critical Role of Twin Screw Extruders in B2B Safety Footwear Production

One of the most compelling application areas for twin screw rubber extruders in the B2B trade context is the production of safety footwear components — particularly outsoles, 중창, and toe cap encapsulation compounds. The connection between extrusion technology Bondtech Extrud and foot protection is direct and consequential: the quality of the rubber compound, as processed through the extruder, determines whether a safety shoe or boot will actually protect the wearer's toes, 피트, and ankles in hazardous work environments.

Why Rubber Compound Quality Matters for Toe Protection

Safety footwear standards — ISO에서 20345 in Europe and ASTM F2413 in the United States — specify rigorous performance requirements for outsole materials:

충격 저항: The toe cap area must withstand an impact energy of 200 줄 (에 해당 20 kg weight dropped from approximately 1 미터). The rubber compound surrounding and supporting the toe cap must absorb and distribute this energy without cracking or deforming permanently.
압축 저항: Safety toe caps must resist a compression force of 15 kN (약 1,500 kg). The rubber matrix holding the toe cap in place must maintain structural integrity under this load.
미끄럼 방지: Outsoles must meet SRA, SRB, or SRC slip resistance ratings on various surfaces. The rubber compound's hardness, tread pattern fidelity, and surface energy — all influenced by extrusion quality — directly determine slip performance.
내열성: For industrial environments, outsoles must withstand contact heat up to 300°C without degradation. Consistent vulcanization of the rubber compound, enabled by uniform mixing in the twin screw extruder, 필수적이다.
내화학성: In chemical processing, 석유와 가스, and pharmaceutical environments, outsoles must resist degradation from oils, 연료, 산, 및 용매. The precise dispersion of chemical-resistant additives (achieved through twin screw mixing) determines real-world performance.

How Twin Screw Extrusion Improves Safety Footwear Performance

The twin screw rubber extruder's advantages translate directly into better safety footwear:

Mixing homogeneity is the most critical factor. Safety footwear rubber compounds typically contain 10-15 ingredients — base polymer, 필러 (카본 블랙, silica), 가소제, vulcanization agents, accelerators, 항산화제, and specialty additives. If these ingredients are not uniformly dispersed, the resulting outsole will have weak spots — areas where impact resistance, 내마모성, or chemical resistance falls below specification. 트윈 스크류 압출기, with their intermeshing screw geometry, achieve dispersive and distributive mixing simultaneously, producing compounds with significantly tighter property distributions than single screw or batch mixing processes.

Temperature control precision prevents premature vulcanization (scorch) during processing. Scorched rubber compounds contain partially crosslinked regions that create stress concentration points in the finished outsole — exactly the kind of defect that can cause a safety shoe to fail under impact. Twin screw extruders offer zone-by-zone temperature control with ±1-2°C accuracy, virtually eliminating scorch risk.

Throughput consistency ensures that every outsole produced in a shift meets the same performance standard. For B2B safety footwear manufacturers supplying large orders to industrial clients — mining companies, 건설 회사, oil refineries — consistency is non-negotiable. A single batch of substandard outsoles can result in product recalls, liability claims, and loss of certification.

Construction workers wearing safety boots on a building site demonstrating the importance of protective footwear with reinfor

Protecting Toes: The Real-World Stakes

Workplace foot injuries remain a significant occupational health concern. 그만큼 미국 노동통계국 (BLS) reports approximately 60,000-70,000 foot injuries annually in American workplaces, with crushing and impact injuries to toes being among the most common. EU에서는, Eurostat data indicates similar patterns across construction, 조작, and logistics sectors.

The consequences of inadequate toe protection are severe: Parallel Twin Screw Extruder Supplier

Toe fractures and crush injuries can require months of recovery and may result in permanent disability
Amputations, while less common, do occur when safety footwear fails under extreme loads
Even minor toe injuries cause significant lost work time — the BLS estimates an average of 10 days away from work per foot injury incident
Employer liability costs for foot injuries average USD 9,000-14,000 per incident in direct medical costs alone, 간접 비용으로 (생산성 손실, 대체 노동, 행정적 부담) multiplying that figure by 3-5x

For B2B safety footwear manufacturers, the twin screw rubber extruder is not just a production tool — it is a quality assurance system that directly protects end users. Every improvement in compound consistency, every reduction in material defects, and every gain in processing precision translates into a safer product on the feet of workers in hazardous environments.

Material Innovation Enabled by Twin Screw Technology

Twin screw extruders are also enabling the next generation of safety footwear materials:

Lightweight rubber-TPU hybrid compounds that reduce foot fatigue while maintaining impact protection
Recycled rubber compounds incorporating post-industrial and post-consumer rubber waste — meeting both sustainability goals and performance standards
Nano-filled rubber compounds using nano-silica or graphene additives for enhanced grip, 내마모성, 그리고 단열 — additives that require the intense dispersive mixing only twin screw extruders can provide
Anti-static and ESD (정전기 방전) compounds for electronics manufacturing and explosive atmosphere environments, where precise resistivity control depends on uniform carbon black dispersion

Sourcing Strategy Recommendations for B2B Buyers

Based on the current market landscape, B2B buyers seeking twin screw rubber extruders for US or EU operations should consider the following strategic approach:

첫 번째, define your compound processing requirements precisely — 나사 직경, 처리량, 온도 범위, and the specific rubber types you will process. This prevents over-specification (wasting capital) or under-specification (limiting future flexibility).

두번째, request detailed total cost of ownership (TCO) analyses from shortlisted manufacturers, 구매 가격뿐만 아니라. Include energy consumption, maintenance schedules, spare parts costs, and expected machine lifespan. European-made machines often win on TCO despite higher upfront costs.

제삼, verify the manufacturer's service infrastructure in your region. A twin screw rubber extruder is a 15-20 year investment. The manufacturer's ability to provide spare parts, 기술 지원, and software updates over that period is as important as the machine's initial specifications.

네번째, leverage trade finance instruments. Export credit agency financing, 신용장, and equipment 마스터 배치 기계 도매 leasing arrangements can significantly improve cash flow for capital-intensive machinery purchases.

Ink Mixing Equipment 제오, plan for regulatory compliance from the outset. Ensure the machine meets CE marking requirements (for EU installation) or OSHA and NFPA standards (for US installation), and that the manufacturer provides complete technical documentation for conformity assessment.

Business team analyzing data charts and procurement documents on a conference table representing strategic B2B sourcing decis

자주 묻는 질문 (FAQ)

What is the typical lead time for a twin screw rubber extruder from order to delivery?: Lead times vary by manufacturer and configuration. European manufacturers typically quote 12-20 표준 구성의 경우 몇 주, while custom-engineered lines may require 24-32 주. Chinese manufacturers often offer shorter lead times of 8-14 주. Add 4-8 weeks for ocean freight on transatlantic shipments.
What screw diameter should I choose for my application?: Screw diameter selection depends on required throughput and compound type. For laboratory and pilot-scale work, 20-35mm diameters are common. For production-scale safety footwear outsole compounds, 60-120mm diameters are typical, 배달하다 200-1,500 kg/hr depending on compound viscosity and L/D ratio.
Do twin screw rubber extruders require special facility infrastructure?: 예. Requirements include adequate electrical supply (일반적으로 380-480V 3상), compressed air, cooling water circuits, proper ventilation for rubber fumes, and reinforced flooring to support machine weight (일반적으로 3,000-15,000 kg에 따라 다름). Manufacturers provide detailed site preparation specifications during the quotation process.
How does a twin screw extruder compare to an internal mixer (Banbury) for rubber compounding?: Internal mixers are batch processes; twin screw extruders offer continuous processing. 대용량용, consistent-quality production — such as safety footwear outsole compounds — twin screw extruders provide better batch-to-batch consistency, lower energy consumption per kg, and reduced labor requirements. Many modern facilities use both: internal mixers for initial masterbatch preparation and twin screw extruders for final compounding and shaping.
What certifications should I look for when selecting a twin screw rubber extruder manufacturer?: Key certifications include ISO 9001 (품질 관리), ISO 14001 (환경 관리), CE마킹 (EU 시장에서는 필수), and UL listing (relevant for US electrical safety). For Industry 4.0 능력, look for OPC-UA communication protocol support and compatibility with major MES/ERP platforms.

결론: Strategic Positioning in the Twin Screw Rubber Extruder Market

평행 트윈 스크류 제조업체 The twin screw rubber extruder market sits at the intersection of several powerful trends — EV-driven demand for advanced rubber components, sustainability-mandated equipment upgrades, supply chain reshoring, and the relentless push for higher quality in safety-critical applications like protective footwear. 미국 및 EU의 B2B 구매자의 경우, the current moment offers both opportunity and complexity. Tariff landscapes are shifting, regulatory requirements are tightening, and the technology itself is advancing rapidly with digital twin, 예측 유지 관리, and nano-material processing capabilities.

The manufacturers who will thrive in this environment are those who combine engineering excellence with robust transatlantic service infrastructure, regulatory compliance expertise, and the ability to support their customers' sustainability reporting requirements. 구매자를 위한, the path to a successful procurement outcome runs through rigorous specification, thorough supplier evaluation, and strategic use of the trade finance and policy frameworks that the commercial relationship provides.

Whether you are scaling up safety footwear production, entering the EV rubber components market, or upgrading aging extrusion lines to meet new efficiency and quality standards, the twin screw rubber extruder remains the technology platform of choice — and selecting the right manufacturer is the decision that makes everything else possible.

Sources referenced in this article include data and publications from the 미국 국제 무역청, 유럽위원회 DG 무역, 미국 노동통계국, 저것, 전국제조업체협회, and industry publications including Rubber World 그리고 상업저널. All data cited reflects the most recent available figures as of May. Blender Extrude Independent

목차