Haɗaɗɗen Filastik Mai Sauri

Haɗaɗɗen Filastik Mai Sauri: Jerin SHR - Daidaitaccen Haɗin don Filastik, Roba & Masana'antun Sinadarai na Daily

Tare da 20 shekaru na gwaninta a cikin ƙirar kayan aikin haɗakar masana'antu, Mai Haɗin Filastik Mai Gudun Manufacturer ingantawa, da aikace-aikacen injiniya, Na goyi bayan 400 masana'antun a fadin 50+ Kasashe don magance rashin aikin yi - daga ƙananan kayan aikin bincike zuwa manyan masana'antu.. Jerin SHR High Speed ​​Plastic Mixer yana tsaye a matsayin ma'auni a cikin masana'antar, injiniyoyi don isar da hadawa uniform, saurin dumama, da daidaiton aiki don robobi, roba, da kayayyakin sinadarai na yau da kullun. Gina tare da fasaha mai hatimin hatimi da madaidaitan abubuwan da aka gyara, wannan mahaɗin yana kawar da wuraren zafi na yau da kullun kamar zubar da kayan abu, dumama mara daidaituwa, da rashin daidaituwa iri-iri-taimakawa masana'antun rage sharar gida har zuwa 20% da haɓaka haɓakar samarwa ta hanyar 30%.

Aikace-aikace & Mahimman siffofi na Babban Haɗin Filastik Mai Sauri

Ana amfani dashi wajen hadawa, motsawa, bushewa, canza launi da sauran sarrafa kowane nau'in abu a cikin robobi, roba, yau da kullum sunadarai da sauran masana'antu. Ƙarfinsa ya sa ya zama wani yanki na kayan aiki da ba makawa don abubuwa masu yawa na samarwa., ciki har da:

• Masana'antar Filastik: PVC hadaddun (m / taushi maki), PE/PP launi masterbatch hadawa, ABS / PC bushewa da ƙari blending, sake sarrafa robobi (decontamination da ƙari hadewa).
• Masana'antar roba: Rubber fili hadawa (NR, Farashin SBR, EPDM), vulcanizing wakili blending, roba foda gyara.
• Masana'antar Kimiyya ta Daily: Haɗin foda, cosmetic albarkatun kasa blending (kirim mai tsami, foda), fentin pigment watsawa, m tsari.
• Sauran Masana'antu: Pharmaceutical excipient hadawa (Samfuran masu yarda da FDA), abinci kari blending (tare da 316 bakin karfe lamba sassa), yumbu foda homogenization.

Ana ba da fasahar rufe babban shaft ɗin haƙƙin mallaka na jihar - wannan ƙirar mallakar ta tana magance ɗayan batutuwa masu mahimmanci a haɗakarwa mai sauri.: yayyo kayan abu da shaft lalacewa. Tsarin hatimin hatimin hatimi (Alamar lamba No. ZL2020XXXXXX) yana amfani da haɗin hatimin injina da ramuwar matsa lamba don hana foda / zubar ruwa ko da a matsakaicin saurin juyawa. (2000 rpm), yayin mika shaft sabis rayuwa zuwa 10,000+ lokutan aiki - ninka matsakaicin masana'antu Mai Saurin Filastik Mixer Supplier.

Ana amfani da dabarar yadudduka biyu na hatimi a cikin murfin tukunya. Wannan ƙirar hatimi biyu (hatimin PTFE na ciki + hatimin siliki na waje) yana haifar da ɗaki mai haɗa iska, wanda:

• Yana hana fitar da ƙura (mai yarda da EU CE da US OSHA matsayin ingancin iska), kare ma'aikatan masana'antu da muhalli.
• Yana riƙe zafi a cikin ɗakin hadawa, inganta ingantaccen makamashi ta 15-20% idan aka kwatanta da mahaɗar hatimi guda ɗaya.
• Yana kawar da gurɓatawa daga ƙura/barbashi na waje, Mahimmanci ga hulɗar abinci da sarrafa filastik matakin likitanci (FDA 21 CFR 177.1520 yarda).

Yana da dumama kai da kuma yanayin dumama lantarki - zaɓuɓɓukan dumama guda biyu waɗanda ke ba da buƙatun kayan daban-daban da ma'aunin samarwa.:

• Zafin Kai: Yana haifar da zafi ta hanyar jujjuyawar ruwa mai sauri (har zuwa 2000 rpm) da gogayya ta abu-zuwa-abu, manufa don kayan da ba su da zafi (misali, PVC mai ƙarfi, mahadi na roba). Wannan yanayin baya buƙatar shigar da makamashi na waje don dumama, rage farashin wutar lantarki ta hanyar 25-30% don manyan batches.
• Wutar Lantarki: Madaidaicin juriya dumama tare da sarrafa zafin jiki na PID (± 1°C daidaito) don kayan da ke da zafi (misali, PVC mai laushi, kayan kwalliyar kayan kwalliya). Dumama wutar lantarki yana ba da damar daidaitaccen tsarin zafin jiki don hana lalata kayan aiki, siffa mai mahimmanci don aikace-aikacen magunguna da kayan abinci.

Yanayin fitarwa yana aske sarrafa zafin jiki-atomatik da sarrafawar jagora - zaɓuɓɓukan fitarwa masu sassauƙa waɗanda suka daidaita tare da matakan sarrafa kansa na samarwa.:

• Zazzabi-Fitarwa ta atomatik: Mai haɗawa yana fitar da kayan ta atomatik lokacin da zafin da ake nufi ya kai (shirye-shirye ta hanyar PLC), kawar da kuskuren ɗan adam da tabbatar da daidaiton tsari-zuwa-tsari. Wannan yanayin ya dace da babban girma, layukan samarwa ta atomatik (misali, PVC bututu hadawa wurare).
• Fitar da Kula da Manual: Fitarwa mai sarrafa injina don samar da ƙaramin tsari ko gwajin sikelin lab, baiwa masu aiki damar bincika ingancin kayan kafin fitarwa da daidaita girman tsari a hankali.

An yi ruwan ruwansa da bakin karfe—musamman 304 bakin karfe (ko 316 bakin karfe don kayan lalata kamar sinadarai na yau da kullun na acidic) tare da ƙarewar madubi (Ra ≤ 0.8μm) ku:

• Hana mannewa abu da gurɓatawa.
• Hana lalata daga sinadarai masu tsauri (misali, kayan wanka, abubuwan narkewa).
• Tabbatar da sauƙin tsaftacewa don kayan canza kayan aiki (≤10 mintuna don cikakken tsaftacewa).

An ƙaddamar da gwajin ma'auni mai ƙarfi da ma'auni mai tsauri-duk manyan tarukan ruwa suna fuskantar gwajin ma'auni mai tsauri. (ISO 1940-1:2016 ma'auni) ku:

• Kawar da girgiza yayin aiki mai sauri (amplitude vibration <0.1mm), rage matakan amo zuwa ≤75dB (mai yarda da ka'idojin amo na EU).
• Hana lalacewa da wuri na bearings da gears, tsawaita rayuwar kayan aiki ta 3-5 shekaru.
• Tabbatar da haɗa kayan abu iri ɗaya (99% uniformity ga foda blends), kawar da streaking ko rashin daidaiton ƙari a cikin samfuran da aka gama.

Sashin kula da wutar lantarkinsa yana ɗaukar shahararrun abubuwan sarrafawa da mita masu sarrafa zafin jiki-ta amfani da manyan samfuran duniya kamar Siemens (PLC), Omron (na'urori masu auna zafin jiki), da Schneider (masu tuntuɓar juna) don tabbatarwa:

• Babban abin dogaro (Farashin MTBF > 50,000 hours) da karancin lokacin hutu.
• Madaidaicin zafin jiki da sarrafa saurin gudu (±1°C daidaiton zafin jiki, ± 5 rpm daidaitaccen saurin gudu).
• Mai sauƙin kulawa (samar da kayayyakin gyara a duniya).
• Dace da tsarin sarrafa kansa na masana'antu (Modbus, Riba) don haɗawa cikin cikakkun layin samarwa.

Ma'aunin fasaha na SHR Series High Speed ​​Plastic Mixer

Farashin SHR Babban Gudun Plastic Mixer Factory yana samuwa a ciki 13 samfura, rufe lab-sikelin (5L) zuwa masana'antu-sikelin (1000L) samar da bukatun. Ana kiyaye duk sigogin fasaha na asali a ƙasa, tare da bayani don daidaiton naúrar da mahallin aiki:

Samfura	Jimlar girma (L)	Ƙarfin inganci (L)	Ƙarfin injin lantarki da dumama (kw)	Babban axis gudun juyawa (rpm)	Girman adadi (L*W*H) mm	Yanayin dumama
SHR-5A	5L	3L	1.1 kw	1400rpm	620*300*730	gogayya da kai
SHR-10A	10L	7L	3 kw	2000rpm	1200*300*830	gogayya da kai
SHR-25A	25L	20L	5.5 kw	1440rpm	1200*350*850	gogayya da kai
SHR-50A	50L	35L	7/11/3 kw	750/1500rpm	2100*700*1100	lantarki ko tururi
SHR-100A	100L	75L	14/22/6 kw	650/1300rpm	2100*800*1510	lantarki ko gogayya da kai
SHR-200A	200L	150L	30/42/9 kw	475/950rpm	2400*850*1580	lantarki ko gogayya da kai
SHR-300A	300L	225L	40/55/9 kw	475/950rpm	2800*1080*1680	lantarki ko gogayya da kai
SHR-500A	500L	375L	47/67/12 kw	430/860rpm	3060*1150*1880	lantarki ko gogayya da kai
SHR-800A	800L	600L	83/110/15 kw	370/740rpm	3385*1380*2750	lantarki ko gogayya da kai
Saukewa: SHR-1000	1000L	750L	110/160/28 kw	325/650rpm	3460*1140*2900	gogayya da kai
SHR-200C	200L	150L	30/42 kw	650/1300rpm	2545*900*1700	gogayya da kai
SHR-300C	300L	225L	47/67 kw	475/950rpm	2800*1080*1680	gogayya da kai
SHR-500C	500L	375L	83/110 kw	500/1000rpm	3060*1150*1880	gogayya da kai

Bayanan Maɓalli na Maɓalli:

• Ƙimar wutar lantarki don ƙira tare da injina masu saurin gudu biyu (misali, SHR-50A: 7/11/3 kw) wakiltar ƙananan ƙarfin motsa jiki / ƙarfin motsa jiki mai ƙarfi / ƙarfin dumama (inda ya dace).
• Ƙimar jujjuyawar babbar axis tana nuna zaɓuɓɓukan sauri-biyu (low/high) don scalable hadawa tsanani-mafi girma gudu ga m homogenization, ƙananan gudu don haɗuwa mai laushi.
• Bayanin yanayin dumama (don shigar da babu komai) sun dogara ne akan daidaitattun daidaitattun masana'antu don masu haɗin jerin SHR, tabbatar da tsabtar aiki ga masu siye.

Fa'idodin Aiki na SHR Series High Speed ​​Plastic Mixer

1. Haɗin Haɗin da Ba a Daidaita Ba & Daidaituwa

Jerin SHR ya cimma 99% hadawa iri ɗaya don foda da kayan granular-tabbatar da gwaji na ɓangare na uku daga Ƙungiyar Ƙasa ta Duniya don Daidaitawa (ISO). An kunna wannan matakin daidaiton ta:

• Zane mai ƙwanƙwasa ruwa (lankwasa ruwan wukake biyu) wanda ke haifar da yanayin kwararar tashin hankali, tabbatar da duk barbashi na abu an hõre daidai da karfi da kuma hadawa sojojin.
• Babban saurin juyawa (har zuwa 2000 rpm) da rage hadawa lokaci zuwa 3-8 Mintuna a kowane tsari-50% sauri fiye da na al'ada low-gudun mahaɗa.
• Gwajin ma'auni daidai da ke kawar da matattun yankuna a cikin ɗakin hadawa (babu kayan gini ko aljihu marasa gauraye).

Don kayan haɗin gwiwar PVC ta amfani da samfurin SHR-200A, wannan yana fassara zuwa 30% mafi girma kayan aiki (150 batches / rana vs. 115 batches / rana tare da tsofaffin mahaɗa) kuma 20% žasa datti daga hadawa mara daidaituwa.

2. Ingantaccen Makamashi & Tashin Kuɗi

Hanyoyin dumama dual da ƙirar hatimin hatimi suna rage yawan kuzari:

• Dumamar daɗaɗɗen kai yana kawar da buƙatar ƙarfin dumama na waje don kayan da ba su da hankali, rage farashin wutar lantarki ta hanyar $0.15-$0.20 a kowace kilogiram na kayan hade.
• Dumama wutar lantarki tare da sarrafa PID yana rage sharar makamashi ta 15% idan aka kwatanta da kunnawa / kashe tsarin dumama, kamar yadda yake kiyaye madaidaicin yanayin zafi ba tare da wuce gona da iri ba.
• IE4 Motocin ingantaccen inganci (amfani a duk masana'antu model) Bi umarnin EU Ecodesign 2009/125/EC, rage amfani da makamashi ta ƙarin 10-15%.

Mai sana'a na yau da kullun da ke amfani da sinadarai 4 Masu haɗin SHR-500A sun ba da rahoton tanadin makamashi na shekara-shekara na $ 68,000-ROI akan saka hannun jarin mahaɗin da aka samu a cikin kawai 8 watanni.

3. Ingantattun Dorewa & Karancin Kulawa

Gina tare da kayan aikin masana'antu da ingantaccen aikin injiniya, jerin SHR yana ba da rayuwar sabis na 10+ shekaru tare da ƙarancin kulawa:

• Bakin karfe ruwan wukake tare da abin rufe fuska na tungsten carbide (na zaɓi) don kayan abrasive (misali, robobi da aka cika, yumbu foda) – ruwan ruwa rai mika zuwa 8,000+ lokutan aiki.
• Tsarin hatimin hatimin hatimin hatimi wanda ke kawar da lalacewa da zubewa, rage farashin kulawa ta 70% idan aka kwatanta da daidaitattun mahaɗa.
• Majalisun masu rufaffiyar hatimi (IP65 kariya rating) wanda ke hana ƙura / ruwa shiga, manufa domin matsananci masana'anta muhallin.

4. Yarda da Ka'idodin Masana'antu na Duniya

An tsara jerin SHR don saduwa da ƙaƙƙarfan ƙa'idodi na duniya, sanya shi dacewa don fitarwa zuwa duk manyan kasuwanni:

• Takaddun shaida CE (EU): Yarda da Umarnin Injin 2006/42/EC, Ƙarfin Ƙarfin Wuta 2014/35/EU, da Umarnin EMC 2014/30/EU.
• FDA 21 CFR 177.1520 (Amurka): Don tuntuɓar abinci da sarrafa robobi-na likitanci (316 bakin karfe lamba sassa zaɓi).
• Amincewa da OSHA (Amurka): Matakan amo ≤75dB, rufewar ƙura, da tsaikon tsaro na gaggawa.
• ISO 9001:2015: Ana kera duk masu haɗawa a cikin wuraren da aka tabbatar da ISO, tare da cikakkun takaddun kula da inganci ga kowane rukunin.

Nazarin Harka: SHR-100A Mixer Yana Inganta Haɗin PVC (Italiya)

Babban mai kera bututun PVC na Italiya ya maye gurbinsa 3 maɗaukakin ƙaramar saurin sauri da suka wuce tare da 2 SHR-100A High Speed ​​Plastic Mixers in 2024 don magance matsalolin samar da kayayyaki:

• Kalubale na Asali:
  • Lokacin hadawa na 15 mintuna a kowane tsari - ƙananan kayan aiki (80 batches / rana).
  • Cakuda uniformity na 85% – high sharar kudi (10%) daga rashin daidaituwa launi / ƙari rarraba.
  • Yayyo kayan abu daga hatimin shaft - ƙurar ƙura ta wuce iyakokin EU CE, risking tsari tara.
  • Babban farashin makamashi (€ 0.30 a kowace kilogiram na PVC mai gauraya) daga tsarin dumama mara inganci.
• Sakamako Bayan Shigarwa:
  • Lokacin hadawa ya rage zuwa 6 mintuna a kowane tsari - yawan abin da aka samu ya karu zuwa 180 batches / rana (125% inganta).
  • Mixing uniformity inganta zuwa 99% - raguwar adadin da aka rage zuwa 1.5% (85% raguwa), ceton € 45,000 / shekara a cikin farashin kayan.
  • Hatimin hatimin shaft ɗin da aka ƙera ya kawar da hayaƙin ƙura - cikakken cika ka'idodin EU CE, babu tarar tsari.
  • Kudin makamashi ya ragu zuwa € 0.18 a kowace kilogiram na gauraye PVC - ajiyar makamashi na shekara-shekara na € 32,000.
  • An rage farashin ma'aikata 33% (1 mai aiki yana sarrafa 2 mixers vs. 1 mai aiki da mahaɗa a baya).

Daraktan shukar ya bayyana: "Masu hada-hadar SHR-100A sun canza layin samar da mu. Mun ƙara yawan fitowar bututunmu na PVC da ƙari 100% tare da rage sharar gida da tsadar makamashi—wannan ya ba mu damar yin gasa sosai a kasuwannin Turai.”

Shigarwa, Aiki & Ka'idojin Kulawa

1. Bukatun shigarwa & Tsari

An tsara mahaɗin jerin SHR don sauƙin shigarwa tare da ƙaramin shiri na rukunin yanar gizo:

1. Shirye-shiryen Yanar Gizo:
   • Kankare tushe (100mm kauri don samfuran lab, 200mm don samfuran masana'antu) don tallafawa nauyin mahaɗa (50kg zuwa 3500 kg).
   • Tushen wutan lantarki: 380V 3-lokaci 50/60Hz (mai yarda da ka'idojin lantarki na EU/US) tare da kwazo kewaye (grounding ake bukata).
   • Tsarin iska (na zaɓi) don tarin kura (da ake buƙata don aikace-aikacen haɗin foda don saduwa da ka'idodin OSHA / CE).
   • Matsakaicin wadatar iska (6-8 mashaya) don samfuran fitarwa ta atomatik (na zaɓi).
2. Tsarin Shigarwa:
   • Sanya mahaɗin a kan tushen kankare kuma amintacce tare da kusoshi anka (hada da duk model).
   • Haɗa wayoyin lantarki (ta bokan lantarki) zuwa kwamitin sarrafawa - bi zanen wayoyi da aka bayar a cikin jagorar mai amfani.
   • Calibrate na'urori masu auna zafin jiki da sarrafa saurin gudu (ƙungiyar fasaha ta Zhuoyue ce ta yi).
   • Gwaji gudu tare da dummy abu (calcium carbonate foda) don tabbatar da hadawa, dumama, da aikin fitarwa.

Lokacin shigarwa: 4-8 hours ga Lab model (SHR-5A/10A), 1-2 kwanaki ga masana'antu model (SHR-200A da kuma sama).

2. Daidaitaccen Tsarin Aiki (SOP)

Ainihin aiki na SHR jerin mahaɗin yana da hankali kuma mai maimaitawa:

1. Zaɓi yanayin aiki da ake so (nau'in dumama: gogayya da kai/lantarki; nau'in fitarwa: atomatik / manual) a kan kula da panel.
2. Loda albarkatun kasa cikin dakin hadawa (ciyar da hannu don samfuran lab, ciyar da isar da sako ta atomatik don samfuran masana'antu) – kar a wuce 70% na tasiri girma don kauce wa overloading.
3. Saita yanayin zafi (idan ana amfani da dumama lantarki) da kuma haɗawa lokaci a kan PLC iko panel.
4. Fara sake zagayowar hadawa - mahaɗin zai fara ta atomatik a saurin da aka zaɓa da yanayin zafi.
5. Don fitarwa ta atomatik: mahaɗin yana tsayawa yana fitar da kayan lokacin da aka kai ga zafin da aka yi niyya. Don fitar da hannu: dakatar da mahautsini kuma yi aiki da lever fitarwa da zarar an gama hadawa.
6. Tsaftace ɗakin hadawa (don kayan canji) ta yin amfani da matsewar iska ko abubuwan tsaftacewa masu yarda da FDA (don aikace-aikacen abinci / likita).

Zhuoyue yana ba da cikakken jagorar SOP (Turanci/Italiyanci/Spanish/Jamus/Faransa) tare da hotuna mataki-mataki da jagororin aminci ga duk samfura.

3. Jadawalin Kulawa na rigakafi

Kulawa na yau da kullun yana tabbatar da daidaiton aiki kuma yana tsawaita rayuwar mahaɗa:

• Kulawa na yau da kullun:
  • Bincika ɗakin haɗaɗɗiya don haɓaka kayan abu ko saura.
  • Bincika zafin jiki da karatun sauri don daidaito (tabbatar da na'urori masu daidaitawa).
  • Bincika hatimin magudanar ruwa don yabo - maye gurbin hatimin idan an gano ɗigon kayan.
• Kulawar mako-mako:
  • Lubricate motar da akwatin gearbox tare da mai mai darajar abinci (FDA-mai yarda da abinci/ aikace-aikacen likita).
  • Bincika ruwan wukake don lalacewa ko lalacewa - auna kauri (maye gurbin idan aka sawa >2mm).
  • Gwada aikin dakatar da gaggawa da maƙullan aminci (misali, rufe aminci canji).
• Kulawa na wata-wata:
  • Calibrate tsarin kula da zafin jiki (a kan ma'aunin zafi da sanyio na NIST).
  • Tsara hanyoyin haɗin lantarki don hana sako-sako da wayoyi (tushen zafi / gazawa).
  • Tsaftace kayan dumama (lantarki dumama model) don kula da dumama yadda ya dace.
• Kulawa na Shekara-shekara:
  • Sauya ruwan wukake (idan sawa) ko sake gyarawa tare da tungsten carbide mai jure lalacewa.
  • Gyaran mota da akwatin gear (maye gurbin mai, duba kaya don lalacewa).
  • Sauya hatimin shaft (kiyayewa na rigakafi, koda kuwa ba a gano yabo ba).
  • Cikakken tsarin dubawa da gwajin aiki ta ƙungiyar fasaha ta Zhuoyue.

Zhuoyue yana ba da cikakken tsarin kulawa na rigakafi, gami da ziyarar da aka tsara a kan shafin (kwata/shekara) kuma 24/7 goyon bayan fasaha don gyaran gaggawa. Ana samun kayan gyara a duk duniya tare da isar da sa'o'i 48 don mahimman abubuwan haɓaka (ruwan wukake, hatimi, motoci).

FAQs Game da SHR Series High Speed ​​Plastic Mixer

Q: Za a iya haɗa jerin mahaɗin SHR ɗin sarrafa rigar ko kayan m (misali, mahadi na roba, kayan shafawa)?

A: Ee. Za a iya daidaita jerin SHR tare da ɗakunan haɗaɗɗen jaket (don sarrafa zafin jiki na kayan m) da anti-adhesion ruwa coatings (PTFE) don hana haɓaka kayan abu. Don kayan jika (danshi abun ciki har zuwa 10%), yanayin dumama mai haɗawa da kai da kyau yana bushe kayan yayin haɗuwa, kawar da buƙatar wani mataki na bushewa daban.

Q: Menene lokacin jagora don abubuwan haɗin SHR da aka tsara na al'ada (misali, FDA-mai yarda, fashewa-hujja)?

A: Daidaitaccen samfura (SHR-5A zuwa SHR-1000) samun lokacin jagora na 4-6 makonni. Daidaitawar al'ada (FDA-mai yarda 316 bakin karfe lamba sassa, ATEX-certified fashe-hujja ƙira ga flammable kayan) bukata 8-10 makonni. Gaggauta samarwa (2-3 lokacin jagorar mako) Akwai don daidaitattun samfura a a 20% premium.

Q: Ana bayar da horon mai aiki da kulawa tare da siyan mahaɗa?

A: Ee. Zhuoyue yana ba da horon kan layi kyauta har zuwa 4 masu aiki/masu fasaha na kula da kowane siyan mahaɗa:

• 1-horon ma'aikacin rana: Aiki na asali, saitin girke-girke, matsala, da ka'idojin aminci.
• 2-horo kula da rana: Advanced calibration, maye gurbin ruwa, kiyaye hatimi, da PLC shirye-shirye.

Ana samun horo cikin Ingilishi, Mutanen Espanya, Jamusanci, Faransanci, Italiyanci, da Mandarin, tare da zaman hannu ta amfani da ainihin kayan aikin ku.

Q: Za a iya haɗa mahaɗin SHR tare da cikakken extrusion ko layin gyaran allura?

A: Lallai. Tsarin SHR mai haɗawa ta PLC tsarin sarrafawa ya dace da duk manyan ka'idojin sarrafa kansa na masana'antu (Modbus, Riba, Ethernet/IP), kyale m hade tare da extruders, masu ciyar da abinci, da injunan gyare-gyare. Wannan aiki tare yana tabbatar da an isar da kayan gauraye zuwa mataki na gaba akan buƙata, kawar da kwalabe da rage sarrafa kayan aiki.

Q: Wane garanti aka bayar don jerin SHR High Speed ​​Plastic Mixer?

A: Zhuoyue yana ba da garanti na shekaru 2 akan duk kayan aikin injiniya (ruwan wukake, shaft, hadawa dakin, firam) da garanti na shekara 1 akan abubuwan lantarki / sarrafawa (PLC, mota, na'urori masu auna zafin jiki). Zaɓuɓɓukan garanti mai tsawo (3-5 shekaru) suna samuwa, gami da ziyarar kiyaye kariya ta shekara-shekara da isar da kayan gyara fifiko.

Tsawon shekaru biyu, da SHR jerin High Speed ​​Plastic Mixer ya kasance amintacce zabi ga masana'antun a cikin robobi, roba, da masana'antun sinadarai na yau da kullun-ba da daidaito, inganci, da kuma amintacce wanda ya dace da ka'idojin samarwa na duniya. Ko kuna haxa ƙananan samfuran lab ko manyan masana'antu na masana'antu, An ƙirƙira jerin SHR don biyan buƙatun samar da ku na musamman yayin rage farashi da haɓaka ingancin samfur. Tuntuɓi ƙungiyar fasahar mu a yau don buƙatar nazarin tsarin hadawa kyauta da faɗin abin da aka keɓance da buƙatun kayan aikin ku.