Lab Twin Screw Extruder

Zhuoyue Lab Mafahla Series Twin Screw Lab Extruder

Extruder ea laboratori e etselitsoe mosebelisi oa boemo ba teko kapa ea ho kena, kapa tlhahiso e nyane ea colorbatch ea mebala le masterbatch e 'ngoe ea tlatsetso. Moralo oa modular o etsa hore e be bonolo haholo khahlano le mefuta e fapaneng ea diresepe.

Mohala oa Zhuoyue Lab Extruder o entsoe ho fihlela litlhoko tse ikhethang tsa U.S. lilaboratori tsa lipatlisiso, mafapha a saense a polymer a univesithi, le bahlahisi ba banyenyane ba masterbatch-ho fana ka ts'ebetso ea boemo ba indasteri ka mokhoa o kopanetsoeng, Extrusion Plastic Manufacturing sebaka sa maoto se baballang matla se etselitsoeng libaka tsa laboratori. Ho fapana le li-extruders tsa tlhahiso e felletseng, moralo ona o shebaneng le lab o etelletsa pele ho tenyetseha, boiketlo ba tšebeliso, le ho boloka litšenyehelo bakeng sa nts'etsopele ea foromo, teko ea thepa, le tlhahiso ea lihlopha tse nyenyane (1-50 kg/h)-a bohlokoa bakeng sa U.S. R&Lihlopheng tsa D tse sebetsanang le mekhoa e mecha ea polasetiki, lisebelisoa tse tsitsitseng, le li-masterbatches tsa tloaelo bakeng sa likoloi, phutheloana, le liindasteri tsa bongaka.

Li-extruder tsa Lab li ka hlomelloa ka lebokose la li-gearbox tse phahameng bakeng sa matla a holimo ho fihlela litlhoko tsa bareki. Ntlafatso ena ea boikhethelo e loketse U.S. li-labs tse eketsang litlhare tse tšepisang ho tloha tekong ho isa tlhahisong e nyane, ho felisa tlhoko ea ho fetisetsa lits'ebetso ho lisebelisoa tse kholo pele ho nako. Sebopeho sa torque e phahameng (e lumellana le bobeli 25 le 35 mehlala) e boloka mokhoa o ts'oanang oa maoto ha e ntse e matlafatsa bokhoni ba ho sebetsa bakeng sa li-polymers tse tlatsitsoeng kapa tse fetotsoeng - tse loketseng U.S.. bafuputsi ba nts'etsapele metsoako ea polasetiki e sebelisoang hape kapa lisebelisoa tse thehiloeng ho bio tse nang le litlhoko tse ikhethang tsa ts'ebetso.

Zhuoyue e tla ntlafatsa moralo ho latela liforomo tse fapaneng hammoho le lits'ebetso ho fihlela litlhoko tse fapaneng. Lab extruder e sebetsa sebopeho sa mofuta o arohaneng ka moralo oa modular o bonolo haholo ho o hloekisa le ho hlokomela ts'ebetso eohle ea polymer ka moqomong.. Bakeng sa U.S. Li laboratori tse khomarelang GLP (Ts'ebetso e ntle ea laboratori) litekanyetso, moralo ona o arohaneng oa moqomo o nolofalletsa ponahalo e felletseng ea ts'ebetso ea ho qhibiliha, ho nolofatsa pokello ea lintlha le ho etsa bonnete ba ho pheta-pheta litekong tsohle Plastic Extrusion Manufacturers tlhokahalo ea bohlokoa bakeng sa litlhahiso tsa taolo ho sesebelisoa sa bongaka le nts'etsopele ea polasetiki ea puisano ea lijo.

Ke motlakase oa sechaba feela o lekaneng hore mochini o sebetse. Ena ke monyetla o hlakileng bakeng sa U.S. labs, kaha extruder e sebetsa ka matla a sechaba a 120/240V (ha ho hlokahale matla a indasteri a 480V) 'me e ka kenngoa libakeng tse tloaelehileng tsa laboratori ntle le lintlafatso tse theko e boima tsa motlakase. Sena se lumellana le U.S. lithibelo tsa mahlale a motheo a univesithi le a khoebo, ho fokotsa nako ea ho kenya le litšenyehelo ha o ntse o latela NFPA 70 (Khoutu ea Naha ea Motlakase) litekanyetso tsa maemo a laboratori.

Nako e telele ea GF Impregnation Extrusion Line, hape e ka behoa sethaleng ka laboratoring. Tokiso ena e khethehileng e fumaneha bakeng sa U.S. lihlopha tsa lipatlisiso tse shebaneng le fiber ea khalase (GF) li-polymers tse matlafalitsoeng - sebaka se holang haholo lits'ebetsong tse bobebe tsa likoloi le lisebelisoa tsa sefofane.. Mohala o momahaneng oa GF o kena holim'a libenche tse tloaelehileng tsa laboratori, ho nolofalletsa tlhahlobo e nepahetseng ea ho khomarela fiber-matrix, katleho ea ho ima, le ntlafatso ea thepa ea mochini ntle le tlhoko ea mela e felletseng ea tlhahiso. Sehlopha sa tekheniki sa Zhuoyue se United States se fana ka ts'ehetso ea tlhophiso ea tloaelo bakeng sa setaele sena se ikhethileng., ho netefatsa hore e tsamaellana le li-feeders tsa GF tse entsoeng U.S. le lisebelisoa tsa tlhahlobo.

Bakeng sa U.S. Lik'hamphani tsa Plastiki Extrusion bareki, Zhuoyue's Lab Extruder e lumellana ka botlalo le UL 61010-1 (Tšireletseho ea Thepa ea Motlakase bakeng sa Tekanyo, Taolo, le Tšebeliso ea laboratori)-setifikeiti sa bohlokoa bakeng sa lisebelisoa tsa lab tse sebelisoang U.S. lits'ebeletso tsa thuto le tsa indasteri. Ho latela melao ena ho felisa kotsi ea tlolo ea ts'ireletso le ho netefatsa ho kopanngoa ka mokhoa o se nang moeli le litsamaiso tse teng tsa polokeho ea lab (mohlala, li-fume hoods, ho koaloa ha tšohanyetso) e hlokoang ke OSHA le liprothokholo tsa polokeho ea univesithi.

Likarolo tsa Sehlahisoa

1. Ho bonolo ho qhaqha le ho kopanya
2. Sebaka se senyane se hapiloeng, sebaka se fokotsehileng sa ho sebetsa
3. Sebelisa lintho tse fokolang bakeng sa kapele, nts'etsopele e bolokang chelete
4. Libarele le li-screw elements li entsoe e le modular, re hlophisa libarele le lisebelisoa tsa screw ka bonngoe lits'ebetsong
5. Ho bonolo ho hloekisa le ho fetola motsoako oa screw
6. Beafatsa pokello ea lintlha le ho rekota

Karolo e 'ngoe le e' ngoe ea Zhuoyue's Lab Extruder e etselitsoe ho sebetsana le lintlha tse bohloko tsa U.S.. basebelisi ba laboratori:

• Ho bonolo ho qhaqha le ho kopanya: Ho qhaqholla ntle le lisebelisoa (ho sebedisa ditlapa tse lokolohang kapele) e fokotsa nako ea phetoho lipakeng tsa liteko ka 70% - e bohlokoa bakeng sa U.S. li-laboratory tse sebetsanang le liteko tse ngata ka letsatsi. Karolo ena e boetse e nolofatsa tlhokomelo, ha ho na lisebelisoa tse khethehileng tse hlokahalang bakeng sa ho hloekisa ka tloaelo kapa ho nchafatsa karolo.
• Sebaka se senyane se hapiloeng, sebaka se fokotsehileng sa ho sebetsa: Mokhoa oa maoto oa extruder (≤1.2m x 0.8m x 1.5m) e lumellana le maemo a tloaelehileng a U.S. li-benchtops tsa laboratori (30” botebo) 'me e lumellana le litekanyetso tsa phihlello tsa ADA bakeng sa libaka tsa mosebetsi tsa lab-e loketseng yunivesithi e nang le batho ba bangata le libaka tsa laboratori tsa khoebo litoropong tsa U.S.. libaka (mohlala, Boston, San Francisco).
• Sebelisa lintho tse fokolang bakeng sa kapele, nts'etsopele e bolokang chelete: Extruder e hloka feela 50-100g ea thepa ka teko (khahlano le. 500g+ bakeng sa tlholisano ea li-extruders tsa lab), ho fokotsa haholo litšenyehelo tsa thepa bakeng sa U.S. bafuputsi ba sebetsang ka lipolima tsa boleng bo holimo (mohlala, PEEK ea boemo ba bongaka, PLA e thehiloeng ho bio). Sena se bohlokoa haholo bakeng sa ba qalang le likhoebo tse nyane tsa U.S. ka R&D likhakanyo tsa lichelete.
• Libarele tsa modular le li-screw elements: Zhuoyue e fana ka likarolo tsa modular tse lumellanang le U.S (e fumaneha Houston, TX) e ka hlophisoang bakeng sa lits'ebetso tse ikhethileng (ho kopanya, kopanya, extrusion) le lisebelisoa (thermoplastics, lisebelisoa tsa elastomer, metsoako). Metsoako e tloahelehileng ea screw element ea fumaneha ka linako tse etellang pele tsa libeke tse 2 bakeng sa U.S. bareki-ka potlako ho feta karolelano ea indasteri ea 4-6 libeke.
• Ho bonolo ho hloekisa le ho fetola motsoako oa screw: Moralo oa moqomo o arohaneng le libaka tse ka hare tse boreleli (bentšitsoe ho Ra ≤0.8μm) fokotsa masalla a lintho tse bonahalang, ho fokotsa tšilafalo pakeng tsa liteko—e leng tlhokahalo ea sehlooho bakeng sa U.S. lilaboratori tse etsang lipolasetiki tsa ho ikopanya le lijo kapa tsa bongaka (FDA 21 CFR e lumellana). Ho hloekisa ho nka ≤15 metsotso (khahlano le. 1+ lihora bakeng sa meralo e sa arohaneng).
• Beafatsa pokello ea lintlha le ho rekota: Extruder e na le likou tsa USB le Ethernet bakeng sa ho hokahana ka mokhoa o se nang moeli le software e tloaelehileng ea ho rema data ea U.S. (mohlala, LabVIEW, Excel) le LIMS (Litsamaiso tsa Tsamaiso ea Boitsebiso ba Lab). Litekanyetso tsohle tsa bohlokoa (mocheso, lebelo, torque) li hlahisoa ka nako ea nnete 'me li ka romelloa kantle ho naha ho FDA 21 Karolo ea CFR 11 lifomete tse lumellanang—ke tsa bohlokoa liindastering tse laoloang joalo ka lisebelisoa tsa bongaka le tsa meriana.

Likarolo tse ling tse ikhethileng tsa U.S. li kenyelletsa:

• Kaho ea tšepe e sa hloekang (304 SS) e lumellana le ASTM A240 bakeng sa ho hanyetsa kutu sebakeng se mongobo sa U.S. libaka tsa lab (mohlala, Florida, California e lebōpong la leoatle).
• Ts'ebetso ea lerata le tlase (≤70dB) kopana le OSHA 29 CFR 1910.95 meeli ea ho pepeseha lerata bakeng sa basebetsi ba laboratori.
• Li-interlocks tsa polokeho tse kopaneng (monyako, setopong sa tshohanyetso) e lumellana le ANSI Z590.3 (Thibelo ea Likotsi Tsa Mosebetsi) bakeng sa U.S. litekanyetso tsa polokeho ea lab.

Litšoantšo tsa lihlahisoa tsa Lab Extruder

Tekheniki Parameters

Mohlala	Torque e khethehileng (N.m/cm3)	Matla a motlakase (Kw)	Lebelo la tlhahiso	Botebo ba sekhahlaD0/Di
25	6	7.5-11	600	1.55
35	6	18.5	600	1.55

Liparamente tsa tekheniki tsa Zhuoyue's Lab Extruder li ntlafalitsoe bakeng sa U.S. lisebelisoa tsa laboratori, ho leka-lekanya tshebetso le matla a matla:

• Mohlala 25: Mohlala o tsebahalang haholo oa U.S. lilaboratori tsa thuto le bahlahisi ba banyenyane ba masterbatch, e nang le motlakase o feto-fetohang (7.5-11Kw) ho lumellana le litlhoko tse fapaneng tsa thepa. Sebopeho sa 7.5Kw se loketse bakeng sa lisebelisoa tsa ho kuta ka tlaase (mohlala, li-resin tse hloekileng, mebala masterbatches), ha ntlafatso ea 11Kw e sebetsana le li-polymer tse tlatsitsoeng hanyenyane (≤20% ho tlatsa). Ka torque e itseng ea 6 N.m/cm3 le 600rpm lebelo la tlhahiso, ea fana 1-20 kg/h ya tlhahiso—e nepahetse bakeng sa ntshetsopele ya foromo le disampole tse nyane bakeng sa U.S. bareki.
• Mohlala 35: E etselitsoe U.S. indasteri R&D li laboratori tse hlokang tlhahiso e phahameng (20-50 kg/h) bakeng sa liteko tsa pele ho tlhahiso. Enjene ea 18.5Kw le 6 N.m/cm3 torque sebetsana le li-polymer tse fetotsoeng tse nang le meroalo ea li-filler ho fihlela 30% (mohlala, PP e tletseng talc, PE e tletseng calcium carbonate)—e tloaelehileng U.S. likoloi le ho paka R&D. Lebelo le tsitsitseng la 600rpm le netefatsa ts'ebetso e tsitsitseng bakeng sa netefatso ea maemo a holimo.
• Karolelano ea botebo ba slot (1.55): Karo-karolelano ena e emetsoe ho mefuta e 'meli ho nolofatsa phetisetso lipakeng tsa lab le li-extruder tsa tekanyo ea tlhahiso (e lumellana le letoto la Zhuoyue la ZTE/HTE). Bakeng sa U.S. bahlahisi, sena se bolela hore data e tsoang litekong tsa laborateng e ka hlahisoa ka kotloloho ho fihlela tlhahiso e felletseng ntle le ho ntlafatsa hape-ho boloka 4-6 libeke tsa nako ea ntlafatso ea ts'ebetso.

Litlhaloso tse ling tsa tekheniki bakeng sa U.S. tumellano:

• Phepelo ea motlakase: Mohlala 25 (7.5-11Kw) - 240V mohato o le mong (matla a setjhaba); Mohlala 35 (18.5Kw) - 240V mekhahlelo e meraro (maemo a U.S. matla a lab).
• Taolo ea mocheso: Ho futhumatsa libaka tse ngata (4-6 libaka) ka ho nepahala ha ±0.5°C, e lumellana le ASTM E230 bakeng sa ho lekanya mocheso.
• Sistimi ea ho pholisa: Mohatsela o phodileng (maemo) kapa e pholileng ka metsi (boikhethelo) - khetho e pholileng ka metsi e lumellanang le U.S. litsamaiso tsa metsi tsa lab (0.2-0.4Khatello ea MPa).
• Boima ba 'mele: Mohlala 25 (180kg), Mohlala 35 (280kg) - e lumellana le maemo a tloaelehileng a U.S. lab benchtop boima meeli (≤300kg).

Likopo tsa U.S. Lilaboratori & Tlhahiso e Nyenyane

Zhuoyue's Lab Extruder ke Likhamphani tse Tloaelehileng tsa Plastic Extrusion e sebelisoang haholo ho pholletsa le lintlha tsa bohlokoa tsa U.S. mebaraka, ho bua ka mefuta e fapaneng ea R&D le litlhoko tse nyane tsa tlhahiso:

• Lipatlisiso tsa Thuto (U.S. Liunivesithi): Mafapha a saense a polymer a holimo U.S. liunivesithi (LE, Univesithi ea Michigan, Texas A&M) sebelisa Mohlala 25 bakeng sa lipatlisiso tsa undergraduate le graduate mabapi le li-polymer tse tsitsitseng, lisebelisoa tse senyehang, le li-feedstocks tsa tlhahiso ea tlatsetso. Tlhokahalo e tlase ea thepa le ts'ebetso e bonolo li etsa hore e be e loketseng merero e etelletsoeng pele ke baithuti, ha bokhoni ba ho rekota data bo tšehetsa lingoliloeng tsa lipatlisiso tse hlahlobiloeng ke lithaka.
• Sehlopha sa R&D (U.S. Baetsi): Tsa makoloi (Ford, GM), phutheloana (Amcor, Moea o Tiisitsoeng), le sesebelisoa sa bongaka (3M, Baxter) lik'hamphani li sebelisa Mohlala 35 bakeng sa tlhahlobo ea foromo ea pele ho tlhahiso. Ka mohlala, morekisi oa likoloi oa Detroit o sebelisitse Lab Extruder ho hlahisa 30% Motsoako oa PP o tletseng khalase bakeng sa li-trays tsa betri tsa EV, ho netefatsa foromo ka tekanyo ea laboratori pele e fetisetsa tlhahiso e felletseng ka letoto la HTE la Zhuoyue-ho boloka $150,000 ka litšenyehelo tsa teko le liphoso.
• Tlhahiso e Nyenyane ea Masterbatch: U.S. bahlahisi ba masterbatch (mohlala, New Jersey, California) sebelisa Mohlala 25 bakeng sa mebala e tloaelehileng le li-masterbatches tse eketsehileng (1-50 lik'hilograma tse ngata) bakeng sa limmaraka tsa niche (lisebelisoa tsa bongaka, sefofane). Moqapi oa modular o lumella ho fetoha ka potlako pakeng tsa mekhoa ea mebala, 'me ts'ebetso ea matla a sechaba e fokotsa litšenyehelo tse holimo bakeng sa likhoebo tse nyane.
• Recycled Plastic R&D: U.S. li-startups li ne li shebane le ho nchafatsa polasetiki (mohlala, naheng ea Colorado, Oregon) sebelisa Lab Extruder ho etsa liteko tsa post-consumer recycled (PCR) motsoako oa polasetiki, ho ntlafatsa likarolo tsa ts'ebetso ho ntlafatsa thepa ea mochini le ho fokotsa ho senyeha. Moralo oa li-split-barrel o nolofatsa ho hloekisa lipakeng tsa liteko tse fapaneng tsa lisebelisoa tsa PCR, ho fokotsa tshilafalo.
• Tsoelo-pele ea Lintho tse Thehiloeng ka Likokoana-hloko: U.S. lik'hamphani tsa temo le tsa biotech (mohlala, naheng ea Iowa, Illinois) sebelisa Lab Extruder ho sebetsa li-polymers tse thehiloeng ho bio (PLA, PHA) e tsoang ho poone le soya, ho lekola maemo a extrusion ho ntlafatsa ts'ebetso le ho tšoarella bakeng sa lits'ebetso tsa ho paka.

U.S. Thuto-pale: Lab ea polymer ea univesithi e Ohio e ile ea reka Model 25 Lab Extruder in 2024 ho etsa lipatlisiso ka thepa ea ho paka e ka senyehang. Liphetho tsa bohlokoa:

• Tšebeliso e fokolitsoeng ea lisebelisoa bakeng sa teko ka 80% (ho tloha ho 500 ho isa ho 100 g), ho fokotsa litšenyehelo tsa selemo le selemo tsa thepa ka $12,000.
• Fokotsa nako ea phetoho ea liteko ho tloha 60 metsotso ho 15 metsotso, ho etsa hore liteko tse ling tse 3x ka beke.
• Lintlha tsa liteko li rometsoe ka kotloloho ho LIMS, ho latela litlhoko tsa tlaleho ea lithuso tsa NSF bakeng sa lipatlisiso tsa thepa e tšoarellang.
• E ekelitse mokhoa o atlehileng oa motsoako oa PLA/starch ho tlhahiso e nyane (20 kg/h) sebelisa Lab Extruder e tšoanang, ho fana ka lisebelisoa tsa mohlala ho balekane ba indasteri bakeng sa netefatso.

U.S.-Specific Support & Ho latela melao

Zhuoyue e fana ka tšehetso e felletseng bakeng sa U.S. Bareki ba Lab Extruder, ho sebetsana le litlhoko tse ikhethang tsa lilaboratori tsa Amerika le likhoebo tse nyane:

• Setifikeiti sa UL: Li-Lab Extruders kaofela ke UL 61010-1 e netefalitsoeng bakeng sa U.S. tšebeliso ea lab, ho felisa tlhoko ea setifikeiti sa mokha oa boraro le ho netefatsa hore ho lateloa litekanyetso tsa ts'ireletso tsa univesithi le tsa khoebo..
• Tšehetso ea Theknoloji ea Libaka: Baenjiniere ba U.S (e fumaneha ka mahala 1-800 palo) fana 24/7 tšehetso ea tekheniki, ka tšebeletso ea setšeng e fumanehang U.S. libaka tsa indasteri (Chicago, Houston, Los Angeles) ka hare 48 lihora.
• Ho fumaneha ha Likarolo tsa Spare: Likarolo tse mahlonoko (screw elements, lintho tse futhumatsang, lisensara) li bolokiloe ntlong ea polokelo ea Zhuoyue's Houston, ka thomello ea letsatsi le hlahlamang ho ea U.S. libaka-ho fokotsa nako ea ho fokotsa nako bakeng sa merero ea lipatlisiso e nkang nako.
• Koetliso & Onboarding: Koetliso e fumanehang sebakeng sa marang-rang (2 lihora) bakeng sa basebetsi ba lab, ts'ebetso ea ho koala, tlhokomelo, le ho rekoa ha data—ho lokiselitsoeng U.S. liprothokholo tsa polokeho ea lab (OSHA, ANSI).
• Tiisetso: 2-tiisetso ea selemo (1 selemo ho feta maemo a indasteri) bakeng sa U.S. bareki, ho koahela likarolo le mosebetsi bakeng sa likarolo tsohle ntle le likarolo tsa ho roala (screw elements, meqomo).
• Boikemisetso: Litlhophiso tse ikhethileng tsa U.S (mohlala, e lumellana le LabVIEW, 120Li-adapter tsa motlakase tsa V, Litokiso tsa bophahamo tse lumellanang le ADA) li fumaneha ka linako tse etellang pele tsa libeke tse 2.

Ho kenya & Litaelo tsa Ts'ebetso bakeng sa U.S. Labs

Ho eketsa tšebetso ea Zhuoyue Lab Extruder in U.S. libaka tsa laboratori, latela litataiso tsena tsa ho kenya le ts'ebetso:

Litlhoko tsa ho Hloma (U.S. Lab Compliance)

• Motlakase: Mohlala 25 (7.5-11Kw) - 240V mohato o le mong, 20Potoloho (maemo a U.S. setsing sa lab); Mohlala 35 (18.5Kw) - 240V mekhahlelo e meraro, 30Potoloho. Lits'ebetso tsohle li tlameha ho ipapisa le NFPA 70 (NEC) Sengoloa 517 bakeng sa lilaboratori tsa bongaka kapa Article 427 bakeng sa li-laboratories tsa indasteri.
• Sebaka: Bonyane tumello ea 30” (76cm) ho potoloha extruder bakeng sa tlhokomelo le ho latela OSHA 29 CFR 1910.22 (litlhoko tsa sebaka sa tsela).
• Moea oa moea: Bakeng sa ho sebetsana le lisebelisoa tse senyehang (mohlala, PVC, li-polymer tse thibelang mollo), kenya extruder tlas'a U.S. mosi oa mosi oa lab-grade (ANSI Z9.5 e lumellana) ho kopana le OSHA 29 CFR 1910.94 litekanyetso.
• Ts'ehetso ea Benchtop: Etsa bonnete ba hore benche ea lab e lekantsoe bakeng sa boima ba extruder (Mohlala 25: 180kg, Mohlala 35: 280kg) mme e dumellana le SEFA (Mokhatlo oa Thepa ea Mahlale le Thepa ea Thepa) litekanyetso tsa thepa ea lab.

Tshebetso Mekhoa e Molemo ka ho Fetisisa

• Licheke tsa Pele ho Teko: Netefatsa tekano ea mocheso (e ka lateloa ke maemo a NIST), lebelo la koloi, le ho kena lipakeng tsa polokeho pele ho teko e 'ngoe le e 'ngoe-e leng bohlokoa bakeng sa ho latela melao ea GLP U.S. li-laboratory tse laoloang.
• Tokisetso ea Lintho: Lisebelisoa tse omileng tsa hygroscopic (mohlala, PA, PET) ho ≤0.05% mongobo oa mongobo (ka ASTM D6980) ho qoba sebopeho sa bubble le ho netefatsa liphetho tse tsitsitseng.
• Ho Hloekisa Protocol: Sebelisa lisebelisoa tsa ho hloekisa tse lumellanang le FDA (mohlala, joala ea isopropyl) bakeng sa liteko tsa polasetiki tsa boemo ba lijo / tsa bongaka, le mehato ea ho hloekisa litokomane bakeng sa ho lumellana le tlhahlobo (FDA 21 Karolo ea CFR 11).
• Ho Rekoa ha Lintlha: Romella lintlha tsohle tsa liteko ho seva se sireletsehileng sa U.S (e lumellana le CCPA bakeng sa bareki ba California) ho sireletsa thepa ea mahlale le ho fihlela litlhoko tsa taolo.

Lintlafatso tsa Bokamoso bakeng sa U.S. Mmaraka

Zhuoyue e tsoela pele ho ntlafatsa mohala oa Lab Extruder ho kopana le U.S e ntseng e tsoela pele.. litlhoko tsa lab, ka morero 2025 lintlafatso ho kenyelletsa:

• IoT Integration: Ho rengoa ha data ntle le waelese (Wi-Fi/Bluetooth) e lumellana le U.S. li-platform tsa lab tse bohlale (mohlala, LabWare, Thermo Fisher SampleManager) bakeng sa ho shebella u le hole le ho arolelana data ka nako ea nnete.
• Ho fepa ka boiketsetso: Compact, Li-feeders tsa tahlehelo tsa boima tse tsamaellanang le U.S (0.1-5 kg/h) bakeng sa tšebeliso e nepahetseng ea li-additive dosing-e loketseng ntlafatso ea lisebelisoa tsa bongaka le tsa sefofane.
• 3D Printing Filament Extrusion: Lihlooho tse ikhethileng bakeng sa tlhahiso ea lab ea likhatiso tsa 3D tsa khatiso (1.75mm, 2.85mm) - e lumellana le U.S. tlhahiso ea tlatsetso R&D mekhoa.
• Likarolo tsa Tšireletso tse Ntlafetseng: Ho lemoha ha khase e kopantsoeng (bakeng sa lisebelisoa tse senyehang) le litsamaiso tsa ho koala ka boiketsetso tse tsamaellanang le U.S. litekanyetso tsa polokeho ea lab (NFPA 45).

Qetello

Zhuoyue's Lab Extruder ke tharollo e loketseng bakeng sa U.S. lilaboratori tsa lipatlisiso, mafapha a polymer ea univesithi, le bahlahisi ba banyenyane ba masterbatch ba batlang ho kopana, tenyetsehang, le tsamaiso e lumellanang ea extrusion. Melemo ea bohlokoa bakeng sa U.S. bareki kenyeletsa:

• UL 61010-1 setifikeiti bakeng sa kopanyo e se nang moeli ho U.S. libaka tsa lab.
• Compact, moralo oa benchtop o loketseng maemo a U.S. lisebelisoa tsa lab (matla a setjhaba, ADA ho latela).
• Tšebeliso e tlase ea thepa le linako tsa phetoho e potlakileng bakeng sa R&D.
• Sebaka sa lehae sa U.S. tshehetso (likarolo, tshebeletso, koetliso) ho fokotsa nako.
• Ts'ebetso e kholo ho tloha litekong tsa laboratoring ho isa tlhahisong e nyane.

Hore na ho nts'etsapele li-polymers tse tšoarellang bakeng sa U.S. limmaraka tsa ho paka, ho hlahloba metsoako ea polasetiki e sebelisoang hape bakeng sa lisebelisoa tsa likoloi, kapa ho hlahisa li-masterbatches tse tloaelehileng bakeng sa lisebelisoa tsa bongaka tsa niche, Zhuoyue's Lab Extruder e fana ka ts'ebetso, tenyetseha, le ho lumellana le U.S. basebelisi ba lab ba hloka ho potlakisa boqapi le ho fokotsa litšenyehelo.