Sebakeng se ntseng se fetoha ka potlako sa polima, thermoplastic elastomers (TPEs) li hlahile e le sehlopha se feto-fetohang le sa bohlokoa haholo, ho koala lekhalo lipakeng tsa lipolasetiki tse thata le liraba tse rekere. Motsoako oa bona o ikhethileng oa thermoplastic processability le elastomeric flexible e ba entse thepa ea khetho ho liindasteri tse fapaneng., from automotive and electronics to construction and consumer goods. Zhuoyue, a leader in extrusion technology, is dedicated to providing state-of-the-art co-rotating parallel twin-screw extruders specifically engineered for the compounding and processing of TPEs, including TPE/SBS/TPU/TPR/TPV and other related composites. With a deep understanding of TPE material properties and industry application needs, Zhuoyue’s extruder series deliver unmatched performance, bokgabane, le ho tšepahala, empowering manufacturers to unlock the full potential of these advanced materials.
1. An Overview of Thermoplastic Elastomers (TPEs)
Thermoplastic Elastomers (TPEs), ka linako tse ling e bitsoa Thermoplastic Rubbers (TPRs), are a diverse family of materials that exhibit the dual characteristics of thermoplastics and elastomers. Unlike traditional cross-linked rubbers, which are infusible and insoluble once cured, Li-TPE li ka qhibilihisoa le ho sebelisoa hape ka mekhoa e tloaelehileng ea thermoplastic joalo ka extrusion, ho bopa ka ente, le ho bopa ho foka, ha u ntse u boloka ho hlaphoheloa hantle le ho feto-fetoha ha maemo mocheso oa kamore. Bobeli bona bo ikhethang bo bakoa ke sebōpeho sa tsona sa limolek'hule: Li-TPE hangata ke li-copolymers (li-polymer tse entsoeng ka likarolo tse peli kapa ho feta tse fapaneng tsa monomer) kapa metsoako ea 'mele ea motsoako oa polasetiki le karolo ea rabara, moo karolo ea polasetiki e etsang matrix e tsoelang pele e kokobetsang le ho phalla ha e futhumala, 'me mohato oa rabara o fana ka elasticity le botsitso.
Melemo ea bohlokoa ea li-TPE ho feta liraba tse tloaelehileng le polasetiki e tsamaisitse ho amoheloa ha tsona ho atileng tlhahisong ea sejoale-joale.. Melemo ena e kenyelletsa: tshebetso e babatsehang (ho lumella tlhahiso ea lebelo le phahameng le likarolo tse rarahaneng tsa geometri), recyclability (ho fokotsa litšila le phello ea tikoloho), khanyetso e ntle ea lik'hemik'hale, thepa e phahameng ea mochine (joalo ka matla a ho tsitsa, ho lelefatsa nakong ya kgefutso, le ho hanyetsa abrasion), le bokgoni ba ho ba mmala, e entsoeng ka letsoho, kapa e fetotsoe ho fihlela litlhoko tse khethehileng tsa kopo. Ho phaella moo, Li-TPE li fana ka poloko ea litšenyehelo tlhahisong ka lebaka la linako tse khuts'oane tsa potoloho, ho fokotsa tšebeliso ea matla, le ho felisa mehato ea ho phekola e hlokahalang bakeng sa liraba tsa setso.
Joalo ka tlhoko ea boima bo bobebe, e tšoarellang, le thepa e tšoarellang e tsoela pele ho hōla, Li-TPE li se li le bohlokoa haholo liindastering tse kang tsa likoloi (bakeng sa ho fokotsa boima le ho fokotsa lerata), lisebelisoa tsa elektronike (bakeng sa likarolo tse tenyetsehang le tse tšoarellang), le thepa ea bareki (bakeng sa lihlahisoa tsa boiketlo le ergonomic). Ho sebelisa melemo ea TPE ka botlalo, bahlahisi ba hloka lisebelisoa tsa ho sebetsa tse ka sebetsanang le mathata a ikhethang a thepa ena, ho kenyeletsa le kutlo ea bona mochesong, sekhahla sa ho kuta, le ho kopanya ho tšoana. Li-extruder tsa Zhuoyue tse potolohang ka bobeli li etselitsoe ho rarolla mathata ana., ho netefatsa ho tsitsa, metsoako ea boleng bo holimo ea TPE e nang le ts'ebetso e nepahetseng.
2. Likarolo tse Tšeletseng tsa Kakaretso tsa Li-TPE tsa Khoebo
Li-TPE tsa Khoebo li arotsoe ka mekhahlelo e tšeletseng e meholo ho latela sebopeho sa tsona sa lik'hemik'hale, sebopeho sa molek'hule, le litšobotsi tsa tshebetso. Sehlopha se seng le se seng se na le thepa e ikhethang e etsang hore e tšoanelehe bakeng sa lits'ebetso tse ikhethileng, le letoto la li-extruder tsa Zhuoyue li entsoe ho sebetsana le litlhoko tsa ts'ebetso ea mofuta o mong le o mong, ho etsa bonnete ba hore liphetho tse nepahetseng tsa motsoako. Ka tlase ke kakaretso e felletseng ea sehlopha ka seng, ho kenyeletsa le sebopeho sa tsona, thepa, le lisebelisoa tse tloaelehileng:
2.1 Li-copolymers tsa styrenic Block (TPS, TPE-s)
Li-copolymers tsa styrenic Block (TPS), e tsejoang hape e le TPE-s, ke lihlopha tse sebelisoang haholo le tse fapaneng tsa li-TPE, e ikarabella bakeng sa karolo e kholo ea 'maraka oa lefats'e oa TPE. Li entsoe ka li-blocks tse fapanyetsanang tsa styrene (monoma e thata ea thermoplastic) le diene (e flexible elastomeric monomer), hangata butadiene, isoprene, kapa lihlahisoa tsa bona tsa hydrogenated. Mefuta e tsebahalang haholo ea TPS e kenyelletsa Styrene-Butadiene-Styrene (SBS), Styrene-Isoprene-Styrene (SIS), SBS ea haedrojene (SEBS), le SIS ea haedrojene (SEPS).
Sebopeho se ikhethileng sa li-block tsa TPS se ba fa litšobotsi tsa bona: li-styrene blocks li theha ka thata, libaka tse nang le likhalase mocheso oa kamore tse sebetsang joalo ka likhokahano tsa 'mele, ho fana ka matla a mochini le botsitso ba sebopeho, ha diboloko tsa diene di bopeha bonolo, libaka tsa rubbery tse fanang ka elasticity le ho tenyetseha. Ha e halefile ka holim'a mocheso oa phetoho ea khalase ea li-blocks tsa styrene (hangata hoo e ka bang 100 ° C), libaka tse thata lia nolofala le ho phalla, ho lumella thepa hore e sebetsoe joalo ka thermoplastic; ha phodiso, libaka tse thata li theha bocha, ho tsosolosa thepa ea elastomeric.
Lintho tsa bohlokoa tsa TPS li kenyelletsa ho feto-fetoha ha maemo ho hoholo, matla a matle a tensile, boima bo tlase, phahameng tshebetsong, le ho lumellana le mefuta e mengata ea li-additives (joalo ka li-plasticizers, fillers, le li-stabilizers). Li boetse li bontša khanyetso e ntle ea metsi, oli, le lik'hemik'hale, le hoja hydrogenated TPS (SEBS, SEPS) fana ka khanyetso e ntlafetseng ho oxidation le mocheso ha o bapisoa le mefuta e seng ea hydrogenated (SBS, SIS).
Lisebelisoa tse tloaelehileng tsa TPS li kenyelletsa: likarolo tsa likoloi (boemo ba leholimo, litiiso tsa monyako, dashboard trim, le li-absorbers tse tšosang), thepa ea bareki (libapalisoa, tshoara, matshwaro, le meqathatso ea lieta), lisebelisoa tsa bongaka (ho kenngoa ha catheter, liphahlo tsa seringe, le litiiso tsa bongaka), le likhomaretsi le li-sealants (sekgomaretsi se chesang se qhibidihang, likhomaretsi tse nang le khatello ea maikutlo). Li-extruder tsa Zhuoyue li ntlafalitsoe bakeng sa ts'ebetso ea TPS, e nang le taolo e nepahetseng ea mocheso le bokhoni ba ho kopanya hantle ho etsa bonnete ba ho hasana ka mokhoa o ts'oanang ha li-additives le thepa e sa fetoheng..
2.2 Thermoplastic Polyolefin Elastomers (TPO, TPE-o)
Thermoplastic Polyolefin Elastomers (TPO), kapa TPE-o, ke motsoako oa 'mele oa polyolefin (hangata polypropylene, PP) le elastomer (hangata ethylene-propylene-diene monomer, EPDM). Ho fapana le TPS, e leng li-copolymers, Li-TPO ke metsoako e sa tšoaneng moo polyolefin e etsang matrix e tsoelang pele 'me elastomer e etsa libaka tse sa tšoaneng tsa rubbery.. Thepa ea TPO e ka hlophisoa ka ho lokisa karo-karolelano ea polyolefin ho elastomer, mmoho le mofuta le bongata ba di-additives (joalo ka li-fillers, li-antioxidants, le li-stabilizers tsa UV).
Li-TPO li fana ka motsoako o ikhethang oa thepa, ho kenyelletsa khanyetso e ntle ea boemo ba leholimo, khanyetso e ntle ea lik'hemik'hale (haholo-holo ho li-acids, metheo, le lino tse tahang), boima bo tlase, matla a tshusumetso e phahameng, le tshebetso e ntle. Li boetse li na le litšenyehelo tse tlase ha li bapisoa le likarolo tse ling tsa TPE, ho li etsa khetho e tsebahalang bakeng sa lits'ebetso tsa molumo o moholo. Ho phaella moo, Li-TPO li ka sebelisoa hape 'me li ka kopanngoa le polyolefin tse ling ho ntlafatsa ts'ebetso kapa ho fokotsa litšenyehelo.
E 'ngoe ea melemo ea bohlokoa ea li-TPO ke ho hanyetsa ha tsona mahlaseli a kotsi a UV le ozone, e etsang hore e be tse loketseng bakeng sa lits'ebetso tsa kantle. Li boetse li na le botsitso bo botle ba mocheso, ka tšebeliso e tsoelang pele ea mocheso ho tloha ho -40°C ho isa ho 120°C, ho itšetlehile ka sebopeho. Li-TPO li fumaneha ka mefuta e fapaneng ea maemo a thata, ho tloha ho bonolo ebile ho tenyetseha (Shore A 50) ho thatafala (Shore D 70), ho etsa hore li tšoanelehe bakeng sa likopo tse fapaneng.
Lisebelisoa tse tloaelehileng tsa TPO li kenyelletsa: likarolo tsa likoloi (likoahelo tse kholo, lifender, liphanele tsa mamati, le dithebe tse ka tlasa mmele), thepa ea kaho (lera la marulelo, lifensetere litiiso, le decking), thepa ea bareki (lisebelisoa tsa mohloa le serapeng, thepa ea lipapali, le thoto), le likarolo tsa indasteri (hose, likhase, le litiiso). Li-extruder tsa Zhuoyue li na le meralo e khethehileng ea sekoti le litsamaiso tsa taolo ea mocheso ho etsa bonnete ba ho kopanya likarolo tsa polyolefin le elastomer., ho thibela ho arohana ha mekhahlelo le ho netefatsa ts'ebetso e tsitsitseng ea thepa.
2.3 Thermoplastic Vulcanisates (VAT, TPE v)
Thermoplastic Vulcanisates (VAT), e tsejoang hape e le TPE-v, ke karoloana ea li-TPO tse kenang ts'ebetsong e matla ea vulcanization nakong ea ho kopanya. Matla a vulcanization a kenyelletsa ho futhumatsa motsoako oa polyolefin le elastomer mochesong o ka holimo ho ntlha e qhibilihang ea polyolefin., ha ka nako e le nngwe o ntse o eketsa ntho e senyang (joalo ka sebabole kapa peroxide) ho tšela karolo ea elastomer. Sephetho ke lisebelisoa moo karolo ea elastomer e hokahaneng ka botlalo (vulcanized) ka likaroloana tse ikhethang, e qhalakantsoeng ka har'a matrix a polyolefin e tsoelang pele.
Ts'ebetso e matla ea vulcanization e fa TPVs thepa e phahameng ha e bapisoa le li-TPO tse tloaelehileng, ho kenyeletsa elasticity e phahameng, molemo compression sete ho hanyetsa, matla a ntlafetseng, le matla a ho hanyetsa mocheso, oli, le lik'hemik'hale. Li-TPV li boetse li boloka thepa ea tsona ea elastomeric holim'a mefuta e mengata ea mocheso, ka tšebeliso e tsoelang pele ea mocheso ho fihla ho 150°C, ho etsa hore di lokele dikopo tsa mocheso o phahameng. Ho phaella moo, Li-TPV li ka sebelisoa hape ka botlalo, esita le ka mora ho sebetsa, e leng molemo o moholo ho feta liraba tsa setso tse hokahantsoeng.
Lintho tsa bohlokoa tsa TPV li kenyelletsa ho fetoha ha maemo ho hoholo, khanyetso e ntle ea abrasion, sete e phahameng ea compression (bokgoni ba ho kgutlela sebopehong sa bona sa pele ka mora ho hatelloa), le tshebetso e ntle. Li fumaneha ka mefuta e mengata ea maemo a thata, ho tloha Shore A 30 ho Shore D 80, mme e ka hlophisoa ho fihlela litlhoko tse ikhethileng tsa kopo, joalo ka ho lieha ha lelakabe, Ho hanyetsa UV, kapa ho latela melao ya dijo.
Lisebelisoa tse tloaelehileng tsa TPV li kenyelletsa: likarolo tsa likoloi (li-gaskets tsa enjine, litiiso tsa tsamaiso ea mafura, le liphaephe tsa HVAC), likarolo tsa indasteri (li-hoses tsa hydraulic, O-rings, le li-gaskets), thepa ea bareki (litiiso tsa lisebelisoa, lisebelisoa tsa ho sebetsa, le lieta), le lisebelisoa tsa bongaka (likarolo tse thibelang likokoana-hloko le mekhoa ea ho fana ka lithethefatsi). Ho sebetsa li-TPV ho hloka taolo e nepahetseng ea mocheso, sekhahla sa ho kuta, le nako ea vulcanization, 'me li-extruders tsa Zhuoyue li etselitsoe ka ho khetheha ho sebetsana le litlhoko tsena, ka likarolo tse tsoetseng pele tsa ho kopanya le mekhoa ea ho laola mocheso ho netefatsa hore vulcanization e ts'oanang le thepa e tsitsitseng ea thepa.
2.4 Thermoplastic Polyurethanes (TPU)
Thermoplastic Polyurethanes (TPU) ke sehlopha sa li-TPE tse entsoeng ka li-block tsa likarolo tse thata le tse bonolo. Likarolo tse thata hangata li tsoa ho li-disocyanate (joalo ka MDI kapa TDI) le ketane extenders (joalo ka ethylene glycol kapa butanediol), ha likarolo tse bonolo li tsoa ho polyols (joalo ka polyester kapa polyether polyols). Karolelano ea likarolo tse thata ho isa ho tse bonolo e khetholla thepa ea TPU: dikahare tse phahameng tsa karolo e thata di fella ka ho thatafala, lintho tse thata haholoanyane, ha karolo e holimo e bonolo e etsa hore e be bonolo, thepa e tenyetsehang haholoanyane.
Li-TPU li fana ka motsoako o ikhethang oa thepa, ho kenyeletsa le matla a kgabane a kgabane, bolelele bo boholo nakong ya kgefutso, khanyetso e phahameng ea ho abrasion, ho tenyetseha hantle ha mocheso o tlase, le khanyetso e babatsehang ea oli, mafura, le lik'hemik'hale. Li boetse li na le ts'ebetso e ntle ea ts'ebetso, ho dumella ho extrusion, ho bopa ka ente, le ho bululela ho etsa libopeho tse rarahaneng. Ho phaella moo, Li-TPU li ka etsoa hore li be pepeneneng, e thibelang lelakabe, kapa e ka senyehang, ho etsa hore li tšoanelehe bakeng sa mefuta e mengata ea likopo.
Ho na le mefuta e 'meli ea mantlha ea li-TPU: li-TPU tse thehiloeng ho polyester le li-TPU tse thehiloeng ho polyether. Li-TPU tse thehiloeng ho polyester li fana ka thepa e phahameng ea mochini, kganetso ya ho abrasion, le khanyetso ea lik'hemik'hale, ho etsa hore li tšoanelehe bakeng sa lits'ebetso tse kang li-hoses tsa indasteri, mabanta, le lieta. Li-TPU tse thehiloeng ho polyether li fana ka maemo a bonolo a mocheso o tlase, ho hanyetsa metsi, le biocompatibility, ho etsa hore e be tse loketseng lisebelisoa tsa bongaka, thepa ea lipapali, le lits'ebetso tsa kantle.
Lisebelisoa tse tloaelehileng tsa TPU li kenyelletsa: likarolo tsa likoloi (mekotlana ea moea, mabanta a pholoso, le lihlahla tse emisitsoeng), likarolo tsa indasteri (hose, mabanta, le li-gaskets), thepa ea bareki (lieta, thepa ea lipapali, le linyeoe tsa mohala), lisebelisoa tsa bongaka (li-catheters, maqeba a maqeba, le lisebelisoa tse kentsoeng), le lisebelisoa tsa elektroniki (lijakete tsa cable le lihokelo). Ho sebetsa li-TPU ho hloka taolo e nepahetseng ea mocheso ho thibela ho senyeha, 'me li-extruder tsa Zhuoyue li na le meralo e khethehileng ea screw le libaka tsa mocheso ho netefatsa ts'ebetso e bonolo le thepa e tsitsitseng..
2.5 Li-copolyester tsa Thermoplastic (TPC, TPE-E)
Li-copolyester tsa Thermoplastic (TPC), hape e tsejoa e le TPE-E, ke li-block copolymers tse entsoeng ka likarolo tsa polyester tse thata le likarolo tse bonolo tsa polyether. Likarolo tse thata hangata li tsoa ho li-polyester tse nkhang hamonate (joalo ka polyethylene terephthalate, PET, kapa polybutylene terephthalate, PBT), ha likaroloana tse bonolo li tsoa ho polyethers (joalo ka polyethylene glycol, PEG, kapa polypropylene glycol, PPG). Sebopeho sa li-block tsa TPC se ba fa tekanyo e ikhethang ea matla a mochine, tenyetseha, le khanyetso ea lik'hemik'hale.
Lintho tsa bohlokoa tsa TPC li kenyelletsa matla a matla a ho tsitsa, bolelele bo boholo nakong ya kgefutso, ho hanyetsa mokhathala o phahameng, botsitso bo botle ba mocheso, le khanyetso e babatsehang ea oli, mafura, le lik'hemik'hale. Li boetse li na le ts'ebetso e ntle ea ts'ebetso, ho dumella ho extrusion, ho bopa ka ente, le thermoforming ka libopeho tse rarahaneng. TPCs maintain their properties over a wide temperature range, with continuous use temperatures ranging from -40°C to 150°C, making them suitable for high-temperature and low-temperature applications.
TPCs are known for their excellent fatigue resistance, which makes them ideal for applications that require repeated flexing or stress, such as hinges, springs, and automotive suspension components. They also have good adhesion to other materials, such as metals and plastics, making them suitable for multi-material assemblies. Ho phaella moo, TPCs are recyclable and can be blended with other polyesters to improve performance or reduce costs.
Typical applications of TPCs include: likarolo tsa likoloi (suspension bushings, door hinges, and exhaust hangers), likarolo tsa indasteri (likere, dibering, and conveyor belts), thepa ea bareki (thepa ea lipapali, libapalisoa, le thepa ea ka tlung), le lisebelisoa tsa bongaka (surgical instruments and implantable devices). Processing TPCs requires precise control of temperature and shear rate to prevent degradation, and Zhuoyue’s extruders are equipped with advanced mixing sections and temperature control systems to ensure uniform processing and consistent material properties.
2.6 Thermoplastic Polyamides (TPA, TPE-A)
Thermoplastic Polyamides (TPA), also known as TPE-A, are block copolymers composed of hard polyamide segments and soft polyether segments. The hard segments are typically derived from aliphatic or aromatic polyamides (such as nylon 6, nylon 66, or nylon 12), ha likaroloana tse bonolo li tsoa ho polyethers (joalo ka polyethylene glycol, PEG, kapa polypropylene glycol, PPG). The block structure of TPAs gives them a unique combination of mechanical strength, tenyetseha, le khanyetso ea lik'hemik'hale.
Key properties of TPAs include excellent tensile strength, matla a tshusumetso e phahameng, khanyetso e phahameng ea ho abrasion, botsitso bo botle ba mocheso, le khanyetso e babatsehang ea oli, mafura, le lik'hemik'hale. Li boetse li na le ts'ebetso e ntle ea ts'ebetso, ho dumella ho extrusion, ho bopa ka ente, le ho bululela ho etsa libopeho tse rarahaneng. TPAs maintain their properties over a wide temperature range, with continuous use temperatures ranging from -40°C to 170°C, ho etsa hore di lokele dikopo tsa mocheso o phahameng.
TPAs are known for their excellent adhesion to metals, which makes them ideal for applications such as automotive fuel lines and hydraulic hoses, where bonding to metal components is required. They also have good resistance to hydrolysis, which makes them suitable for wet or humid environments. Ho phaella moo, TPAs are recyclable and can be blended with other polyamides to improve performance or reduce costs.
Typical applications of TPAs include: likarolo tsa likoloi (mehala ea mafura, li-hoses tsa hydraulic, and gearshift knobs), likarolo tsa indasteri (hose, likhase, le litiiso), thepa ea bareki (lieta, thepa ea lipapali, le thoto), le lisebelisoa tsa bongaka (catheters and implantable devices). Processing TPAs requires precise temperature control to prevent degradation, 'me li-extruder tsa Zhuoyue li na le meralo e khethehileng ea screw le libaka tsa mocheso ho netefatsa ts'ebetso e bonolo le thepa e tsitsitseng..
3. Application Areas of TPEs
Thermoplastic elastomers (TPEs) are used in a wide range of industries due to their unique combination of properties, including flexibility, processability, durability, le khanyetso ea lik'hemik'hale. From automotive and electronics to construction and consumer goods, TPEs are enabling innovation and improving the performance of products across multiple sectors. Ka tlase ke kakaretso e felletseng ea likarolo tsa mantlha tsa ts'ebeliso ea li-TPE, hammoho le mehlala e khethehileng ea lihlahisoa le likarolo tsa TPE tse sebelisoang ka tloaelo:
3.1 Indasteri ea Likoloi
Indasteri ea likoloi ke moreki e moholo oa li-TPE, e ikarabella bakeng sa karolo e kholo ea 'maraka oa lefats'e oa TPE. Li-TPE li sebelisoa mefuteng e mengata ea likarolo tsa likoloi, ho tloha ka hare ho trim ho ea likarolong tse ka tlas'a-hood, ka lebaka la boima ba tsona, durability, le bokgoni ba ho fokotsa lerata, thothomelo, le bohale (NVH). Phetoho e lebisang ho likoloi tsa motlakase (EVs) e ekelitse tlhoko ea li-TPE hape, kaha li loketse bakeng sa ho khantša boima (ho ntlafatsa sebaka sa betri) le bakeng sa ho etsa lisebelisoa tse tenyetsehang joalo ka likhoele tse tjhajang le li-betri seal.
Lisebelisoa tse khethehileng tsa likoloi tsa TPE li kenyelletsa:
- Likoahelo tsa Lerōle: E sebelisoa ho sireletsa likarolo tsa koloi joalo ka litsamaiso tsa ho emisoa, tsamaiso ea tsamaiso, le lisebelisoa tsa drivetrain ho tloha leroleng, ditshila, le mongobo. TPS (SEBS) 'me TPV hangata e sebelisoa bakeng sa likhurumetso tsa lerole ka lebaka la ho tenyetseha ha tsona hantle, kganetso ya ho abrasion, le ho hanyetsa boemo ba leholimo.
- Windows ea kotara: Lifensetere tsa kotara tse feto-fetohang li sebelisoa mefuteng e meng ea likoloi ho ntlafatsa aerodynamics le ho fokotsa lerata la moea. TPU le TPC hangata li sebelisoa bakeng sa lifensetere tsa kotara ka lebaka la ponahalo ea tsona e ntle haholo, khanyetso ea tšusumetso, le ho hanyetsa UV.
- Lisefa tsa Moea: Li-TPE li sebelisoa kahong ea matlo a li-air filter le li-gaskets, ho fana ka tiiso e tiileng ho thibela moya o sa sefeng ho kena enjeneng. TPO le TPV hangata li sebelisoa bakeng sa likarolo tsa sefa moea ka lebaka la khanyetso ea tsona e ntle ea lik'hemik'hale le botsitso ba mocheso.
- Li-Handles le Li-Grips: Li-TPE li sebelisoa ho sebetsana le likoloi (joalo ka maoatla a mamati le maotwana a setereng) ho fana ka boiketlo, bokahodimo bo sa thellang. TPS (SEBS) and TPU are typically used for handles and grips due to their excellent softness, grip, le durability.
- Meteo le Litiiso: Door seals, lifensetere litiiso, and hood seals are critical for preventing water, moea, and noise from entering the vehicle interior. TPO, VAT, and TPS are typically used for weatherstripping due to their excellent flexibility, compression set hanyetsoa, le ho hanyetsa boemo ba leholimo.
- Under-the-hood Components: TPEs are used for under-the-hood components such as engine gaskets, litiiso tsa tsamaiso ea mafura, le liphaephe tsa HVAC. VAT, TPC, and TPA are typically used for under-the-hood components due to their excellent thermal stability, khanyetso ea lik'hemik'hale, and oil resistance.
- Interior Trim: TPEs are used for interior trim components such as dashboard trim, liphanele tsa mamati, and seat trim. TPS (SEBS) and TPO are typically used for interior trim due to their excellent softness, colorability, and low VOC emissions (metsoako ea lintho tse phelang), which are important for improving indoor air quality.
Li-extruder tsa Zhuoyue li etselitsoe lisebelisoa tsa TPE tsa likoloi ka ho khetheha, ka taolo e nepahetseng ea mocheso le bokhoni bo sebetsang ba ho kopanya ho netefatsa thepa e tsitsitseng ea thepa. Letoto la lihlooho tse HTS, ka ho khetheha, e loketse bakeng sa ho sebetsana le li-TPE tse sebetsang hantle tse sebelisoang likarolong tse ka tlas'a-hood, ha letoto la ZTE le fana ka litharollo tse theko e tlaase bakeng sa ho khabisa ka hare le likarolo tse ling tse sa hlokahaleng.
3.2 Indasteri ea Lithapo le Lithapo
Indasteri ea terata le likhoele ke moreki e mong ea ka sehloohong oa li-TPE, kaha li-TPE li fana ka insulation e ntle ea motlakase, tenyetseha, le durability, ho etsa hore e be tse loketseng bakeng sa ho etsa mefuta e mengata ea lithapo le likhoele. Li-TPE li sebelisoa bakeng sa ho koala le ho koala lithapo le likhoele, 'me ka ho khetheha li loketse lits'ebetso tse hlokang ho feto-fetoha ha maemo, joalo ka lisebelisoa tsa elektronike tse nkehang, likhoele tsa koloi, le likhoele tsa indasteri.
Specific wire and cable applications of TPEs include:
- Power Cables: TPEs are used for the insulation and jacketing of power cables, providing excellent electrical insulation and protection against moisture, lik'hemik'hale, le abrasion. TPU, TPC, and TPV are typically used for power cables due to their excellent electrical properties and durability.
- Ignition Cables: Ignition cables are used in automotive engines to transmit high-voltage electricity from the ignition coil to the spark plugs. TPEs are used for the insulation of ignition cables, providing excellent high-temperature resistance and electrical insulation. TPV and TPC are typically used for ignition cables due to their excellent thermal stability and chemical resistance.
- Headphone Cables: Headphone cables require flexibility, durability, and good sound transmission properties. TPS (SEBS) 'me TPU li sebelisoa hangata bakeng sa likhoele tsa li-headphone ka lebaka la ho tenyetseha ha tsona hantle, bonolo, le ho hanyetsa abrasion.
- Li-plug tsa sehokelo: Li-plug tsa likhokahanyo li sebelisoa ho hokahanya lithapo le likhoele ho lisebelisoa tsa elektroniki, 'me li hloka ho kenya letsoho hantle ka motlakase, durability, le boiketlo ba ho sebetsa. TPS (SEBS) 'me TPO hangata e sebelisoa bakeng sa li-plug tsa sehokelo ka lebaka la ts'ebetso ea tsona e ntle haholo le thepa ea motlakase.
- Lithapo tsa indasteri: Lithapo tsa indasteri li sebelisoa libakeng tse thata tsa indasteri, e hlokang ho hanyetsa lik'hemik'hale, oli, le abrasion. TPU, TPC, 'me TPA hangata e sebelisoa bakeng sa likhoele tsa indasteri ka lebaka la ho hanyetsa lik'hemik'hale le ho tšoarella nako e telele.
Ts'ebetso ea terata le insulation ea cable le jacketing e hloka taolo e nepahetseng ea mocheso oa extrusion le lebelo ho netefatsa botenya bo lekanang le ho khomarela hantle ho conductor.. Letoto la HTE la Zhuoyue le loketse haholo lisebelisoa tsa terata le likhoele, as it combines high performance with high cost-effectiveness, delivering higher output while reducing energy consumption.
3.3 Construction and Transportation Industry
The construction and transportation industry uses TPEs for a wide range of applications, ho kenyeletsa thepa ea ho haha, transportation infrastructure, and marine components. TPEs are valued in this industry for their durability, khanyetso ea boemo ba leholimo, and ability to withstand harsh environmental conditions.
Specific construction and transportation applications of TPEs include:
- Sealing Strips: Sealing strips are used in buildings (such as windows, mamati, and roofs) to prevent water, moea, and noise from entering. TPO, VAT, and TPS are typically used for sealing strips due to their excellent flexibility, compression set hanyetsoa, le ho hanyetsa boemo ba leholimo.
- Expansion Joints: Expansion joints are used in bridges, roads, and buildings to absorb thermal expansion and contraction, preventing cracks and damage. TPV le TPC hangata li sebelisoa bakeng sa ho atolosa manonyeletso ka lebaka la elasticity ea tsona e babatsehang, kganetso ya mokgathala, le durability.
- Subway Mats: Metebo ea metro e sebelisoa liteisheneng tsa metro ho fana ka sebaka se sa thelleng, fokotsa lerata, le ho ntlafatsa boiketlo ba bapalami. TPS (SEBS) 'me TPU li sebelisoa hangata bakeng sa meseme ea metro ka lebaka la bonolo ba tsona bo botle, grip, le ho hanyetsa abrasion.
- Likarolo tsa marulelo: Li-membrane tsa marulelo a TPE li sebelisoa bakeng sa marulelo a bataletseng, ho fana ka khanello e ntle ea metsi, khanyetso ea boemo ba leholimo, le durability. TPO le TPV hangata li sebelisoa bakeng sa li-membrane tsa marulelo ka lebaka la ho hanyetsa ha tsona ho matla ha UV le khanyetso ea lik'hemik'hale.
- Likaroloana tsa Marine: Li-TPE li sebelisoa bakeng sa likarolo tsa leoatleng joalo ka likepe tsa likepe, li-bumpers tsa boema-kepe, le liqibi tsa sekepe, ho fana ka khanyetso e babatsehang ea metsi a letsoai, Mahlaseli a UV, le abrasion. TPU le TPC hangata li sebelisoa bakeng sa likarolo tsa leoatle ka lebaka la ho hanyetsa metsi ho matla le ho tšoarella nako e telele.
Construction and transportation applications often require large-volume production of TPE components, and Zhuoyue’s extruders are designed to handle high-output requirements while maintaining consistent quality. The ZTE series offers excellent cost-effectiveness for large-volume applications, while the HTS series is suitable for high-performance components that require superior durability.
3.4 Other Industrial and Consumer Applications
In addition to the major industries mentioned above, TPEs are used in a wide range of other industrial and consumer applications, leveraging their versatility and unique properties. These applications include:
- Drainage Pipes: TPE drainage pipes are used in residential and industrial applications, providing excellent flexibility, khanyetso ea kutu, le durability. TPO and TPV are typically used for drainage pipes due to their excellent chemical resistance and ease of installation.
- Li-Handles le Li-Grips: TPEs are used for handles and grips in a wide range of consumer and industrial products, including tools, kitchenware, le thepa ea lipapali. TPS (SEBS) and TPU are typically used for handles and grips due to their excellent softness, grip, le durability.
- Coasters: TPE coasters are used to protect furniture from water damage and scratches, providing a non-slip surface. TPS (SEBS) and TPU are typically used for coasters due to their excellent softness, colorability, and ease of cleaning.
- Floor Mats: TPE floor mats are used in homes, liofisi, and vehicles to provide a non-slip surface, fokotsa lerata, and protect floors. TPS (SEBS) and TPO are typically used for floor mats due to their excellent durability, kganetso ya ho abrasion, and ease of cleaning.
- Footwear: TPEs are used in footwear applications such as shoe soles, insoles, and uppers, providing excellent comfort, tenyetseha, le ho hanyetsa abrasion. TPS (SBS, SEBS), TPU, and TPV are typically used for footwear due to their excellent cushioning properties and durability.
- Medical Devices: TPEs are used in a wide range of medical devices, including catheters, liphahlo tsa seringe, maqeba a maqeba, le lisebelisoa tse kentsoeng. TPU, TPC, and TPA are typically used for medical devices due to their excellent biocompatibility, sterilizability, le khanyetso ea lik'hemik'hale.
- Lintho tsa ho bapala: TPEs are used in toys for children, providing a soft, bolokehileng, and durable material. TPS (SEBS) and TPU are typically used for toys due to their excellent softness, colorability, and non-toxicity (compliant with food contact and toy safety standards).
4. Technical Specifications of Zhuoyue’s Co-rotating Parallel Twin-screw Extruders
Processing thermoplastic elastomers (TPEs) requires specialized extrusion equipment that can handle the unique properties of these materials, ho kenyeletsa le kutlo ea bona mochesong, sekhahla sa ho kuta, le ho kopanya ho tšoana. Zhuoyue offers a comprehensive range of co-rotating parallel twin-screw extruders, each designed to meet the specific needs of TPE processing, from low-cost, high-volume applications to high-performance, precision compounding. The extruders are available in three main series: HTS, ZTE, and HTE, each with unique features and advantages to suit different application requirements and budget constraints.
All of Zhuoyue’s extruders feature a co-rotating parallel twin-screw design, which offers several advantages over single-screw extruders for TPE processing: better mixing uniformity (critical for TPE blends and composites), tlhahiso e phahameng, better temperature control, and the ability to process a wide range of materials and additives. The twin-screw design also allows for precise control of shear rate, which is important for maintaining the integrity of TPE molecular structures and preventing degradation.
4.1 ZG Series Gearboxes – High-efficiency Transmission and Power Proportioning Total Solution
At the heart of every Zhuoyue extruder is the ZG series gearbox, a high-efficiency transmission system that provides reliable power delivery and precise speed control. Developed and manufactured in-house by Zhuoyue, the ZG series gearboxes feature a symmetrical force-driven structure, which is different from the traditional parallel three-shaft structure used in many other extruders. This unique design offers several key advantages:
- High Torque: The symmetrical force-driven structure distributes torque evenly across the gears, allowing for higher torque capacity and improved durability, which is critical for processing high-viscosity TPEs and filled composites.
- Lebelo le phahameng: The gearbox is designed to operate at high speeds, enabling higher extrusion throughput while maintaining precise control.
- High Precision: The symmetrical design ensures precise alignment of the screws, reducing wear and tear and improving the uniformity of the extruded material.
- Bokhoni bo Phahameng: The improved transmission efficiency reduces energy consumption, lowering operating costs for manufacturers.
- Low Noise: The symmetrical force distribution reduces vibration and operating noise, creating a more comfortable working environment.
- Improved Reliability and Safety: The robust design and high-quality materials used in the ZG series gearboxes ensure long-term reliability and safety, ho fokotsa nako le litšenyehelo tsa tlhokomelo.
The ZG series gearboxes are available in a range of sizes and configurations to match the specific requirements of each extruder series, ensuring optimal performance and efficiency for TPE processing.
4.2 Core Technical Features of Zhuoyue’s Extruders
In addition to the ZG series gearboxes, all of Zhuoyue’s co-rotating parallel twin-screw extruders share a set of core technical features that make them ideal for TPE processing:
- Small Die with Multiple Teeth: The extruder die is designed with multiple small teeth, which improves the uniformity of the extruded material and reduces die swell, a common issue in TPE processing.
- Stable Running, Noise Reduction Optimized Load Equalization Structure: The extruder’s load equalization structure is optimized to reduce vibration and noise, ensuring stable operation even at high speeds and high torques.
- Optimized Tooth Orientation and Tooth Profile: The screw teeth are oriented and profiled to improve mixing efficiency and material conveying, ensuring uniform dispersion of additives and consistent material properties.
- Reduced Shock Vibration and Noise, Increased Gear Carrying Capacity and Reliability: The optimized gear design reduces shock vibration and noise, while increasing the gear carrying capacity and overall reliability of the extruder.
- Maximum Specific Torque 16.5Nm/Cm³: The extruders are capable of delivering a maximum specific torque of 16.5Nm/Cm³, which is sufficient for processing even the most demanding TPEs, including filled composites and high-viscosity materials.
- Stable Output Accuracy Without Degradation: The extruders maintain stable output accuracy over long periods of operation, with no degradation in material properties, ho netefatsa boleng bo tsitsitseng ba sehlahisoa.
- Bophelo bo Bolelele ba Tšebeletso (72,000h): The high-quality materials and robust design of the extruders ensure a long service life of up to 72,000 lihora, reducing the need for frequent replacement and maintenance.
- High Maximum Speed (Up to 1200rpm): The extruders are capable of operating at speeds of up to 1200rpm, enabling high throughput and efficient production of TPE components.
4.3 HTS Series – High-end, High-performance Extruders
The HTS series is Zhuoyue’s flagship line of co-rotating parallel twin-screw extruders, designed for high-end, high-performance TPE processing applications. This series represents the highest level of excellence in Zhuoyue’s product range, combining advanced technology, robust construction, and superior performance to meet the most demanding requirements of TPE manufacturers. The HTS series is available in three sub-series: HTS BASIC, HTS PLUS, and HTS SUPER, e 'ngoe le e' ngoe e etselitsoe litlhoko tse khethehileng tsa kopo.
4.3.1 HTS BASIC Series
The HTS BASIC series is designed for medium-performance TPE processing applications, offering a balance of performance, tenyetseha, le ho boloka litšenyehelo. This series uses medium torque transmissions from leading European manufacturers, ensuring reliable performance and precise control. The HTS BASIC series offers the flexibility of choice through different configuration combinations, allowing manufacturers to tailor the extruder to their specific application requirements.
Key features of the HTS BASIC series include:
- Medium torque transmissions from leading European manufacturers
- Flexible configuration options to suit different TPE processing needs
- Precise temperature control and efficient mixing capabilities
- Suitable for processing a wide range of TPEs, including TPS, TPO, le TPU
- Ideal for medium-volume production of TPE components
The HTS BASIC series is an excellent choice for manufacturers who require reliable performance and flexibility, without the need for the highest torque and speed capabilities of the HTS PLUS and HTS SUPER series.
HTS BASIC Model Parameters
To better match the medium-performance positioning and flexible configuration of the HTS BASIC series, its model parameters are designed to cover most common TPE processing needs. Tafole e latelang e hlakisa li-parameter tse khethehileng, which can be flexibly selected according to different production volumes and material requirements, ensuring the extruder can stably process TPS, TPO, TPU and other common TPEs.
With medium torque transmission and flexible configuration, the HTS BASIC series can meet the basic processing needs of most common TPEs, and the parameter selection is flexible to adapt to different production volumes.
| Mohlala | Torque e khethehileng (N.m/Cm³) | Matla a motlakase (Kw) | Lebelo la tlhahiso (rpm) | Slot depth ratio D0/Di |
|---|---|---|---|---|
| 25 | 11 | 15 | 600 | 1.55 |
| 35 | 11 | 37 | 600 | 1.55 |
| 35 | 11 | 55 | 1000 | 1.55 |
| 50 | 11 | 75 | 600 | 1.55/1.68 |
| 50 | 11 | 110 | 900 | 1.55/1.68 |
| 65 | 11 | 160 | 600 | 1.55/1.68 |
| 65 | 11 | 220 | 900 | 1.55/1.68 |
| 75 | 11 | 220 | 600 | 1.55/1.68 |
| 75 | 11 | 315 | 900 | 1.55/1.68 |
| 95 | 11 | 315 | 600 | 1.55/1.68 |
4.3.2 HTS PLUS Series
The HTS PLUS series is designed for high-performance TPE processing applications, such as engineering plastics and filled masterbatches, which require higher torque and more efficient mixing. This series uses high-torque transmissions developed and manufactured in-house by Zhuoyue, ensuring superior performance and reliability. The HTS PLUS series is optimized for processing high-viscosity TPEs and filled composites, delivering uniform mixing and consistent material properties.
Key features of the HTS PLUS series include:
- High-torque transmissions developed and manufactured in-house by Zhuoyue
- Optimized screw design for improved mixing efficiency and material conveying
- High throughput and energy efficiency
- Suitable for processing high-performance TPEs, including TPV, TPC, TPA, and filled composites
- Ideal for high-volume production of high-quality TPE components
The HTS PLUS series is an excellent choice for manufacturers who require high performance and reliability for demanding TPE processing applications, such as automotive under-the-hood components and industrial hoses.
HTS PLUS Model Parameters
As a high-performance series optimized for high-viscosity TPEs and filled composites, the HTS PLUS series is equipped with Zhuoyue’s self-developed high-torque transmission, which brings higher torque density. The specific parameters below reflect its advantages in stable output and high efficiency, perfectly supporting the demanding processing scenarios such as automotive under-the-hood components and industrial hoses mentioned earlier.
Equipped with Zhuoyue’s self-developed high-torque transmission, the HTS PLUS series has higher torque density, which is suitable for processing high-viscosity TPEs and filled composites, with stable output and high efficiency.
| Mohlala | Torque e khethehileng (N.m/Cm³) | Matla a motlakase (Kw) | Lebelo la tlhahiso (rpm) | Slot depth ratio D0/Di |
|---|---|---|---|---|
| 25 | 13 | 18.5 | 600 | 1.55 |
| 35 | 13 | 45 | 600 | 1.55 |
| 35 | 13 | 75 | 1000 | 1.55 |
| 50 | 13 | 90 | 600 | 1.55/1.68 |
| 50 | 13 | 132 | 900 | 1.55/1.68 |
| 65 | 13 | 185 | 600 | 1.55/1.68 |
| 65 | 13 | 250 | 900 | 1.55/1.68 |
| 75 | 13 | 250 | 600 | 1.55/1.68 |
| 75 | 13 | 355 | 900 | 1.55/1.68 |
| 95 | 13 | 355 | 600 | 1.55/1.68 |
4.3.3 HTS SUPER Series
The HTS SUPER series is Zhuoyue’s highest-end line of co-rotating parallel twin-screw extruders, representing the advanced level of extruder development in China. This series uses Zhuoyue’s newly developed ultra-high torque transmission, which is specifically designed for the high-torque and high-speed characteristics of this series. The structural design of each key component of the extruder has been newly optimized to handle the most demanding TPE processing applications, ensuring superior performance, bokgabane, le ho tšepahala.
Key features of the HTS SUPER series include:
- Ultra-high torque transmission developed by Zhuoyue
- Newly optimized structural design of key components for high-torque and high-speed operation
- Unmatched mixing efficiency and material uniformity
- High throughput and energy efficiency
- Suitable for processing the most demanding TPEs, including ultra-high-performance TPV, TPC, TPA, and filled composites
- Ideal for high-volume production of premium TPE components
With its torque density of 16.5Nm/Cm³ and slot depth ratio of 1.55/1.68, the HTS SUPER series features the highest free volume at 16.5 boima ba torque indastering. Ho phaella ho kaho ea eona e matla, mohala ona o kopantsoe le boholo bo boholo ba enjene ho ba pere ea 'nete bakeng sa ho tsoela pele 24/7/365 tlhahiso, making it the ideal choice for manufacturers who demand the highest level of performance and reliability.
HTS SUPER Model Parameters
As Zhuoyue’s highest-end series, the HTS SUPER series adopts ultra-high torque transmission and optimized key components, which endow it with the highest torque density and speed in the product line. The following parameters fully demonstrate these advantages, making it capable of handling the most demanding TPE processing scenarios and realizing 24/7/365 continuous stable production.
As Zhuoyue’s highest-end series, it adopts ultra-high torque transmission and optimized key components, with the highest torque density and speed, suitable for the most demanding TPE processing scenarios.
| Mohlala | Torque e khethehileng (N.m/Cm³) | Matla a motlakase (Kw) | Lebelo la tlhahiso (rpm) | Slot depth ratio D0/Di |
|---|---|---|---|---|
| 25 | 15.5 | 22 | 600 | 1.55 |
| 35 | 16 | 55 | 600 | 1.55 |
| 35 | 16 | 90 | 1000 | 1.55 |
| 50 | 16 | 160 | 600 | 1.55/1.68 |
| 50 | 16 | 220 | 900 | 1.55/1.68 |
| 65 | 16.5 | 300 | 600 | 1.55/1.68 |
| 65 | 16.5 | 450 | 900 | 1.55/1.68 |
| 75 | 16.5 | 450 | 600 | 1.55/1.68 |
| 75 | 16.5 | 650 | 900 | 1.55/1.68 |
| 95 | 16 | 700 | 600 | 1.55/1.68 |
4.4 ZTE Series – E boloka chelete, Practical Extruders
The ZTE series is designed for manufacturers who require a cost-effective, practical solution for TPE processing. This series offers an excellent price/performance ratio, with parameters designed to suit most TPE materials and applications. The ZTE series maintains the core structural advantages of Zhuoyue’s extruder products, ha o ntse o ntlafatsa tlhophiso ho fihlela ts'ebetso e ntle ea litšenyehelo, making it the first choice for small and medium-sized enterprises (Li-SME) and manufacturers with basic production needs.
Key features of the ZTE series include:
- Excellent price/performance ratio
- Parameters designed to suit most TPE materials, including TPS, TPO, le TPU
- Reliable standard transmission system
- Stable operation and low maintenance costs
- Suitable for low to medium-volume production of TPE components
- Ideal for general-purpose TPE applications, such as consumer goods and basic industrial components
The ZTE series is an excellent choice for manufacturers who pursue practicality and economy, without compromising on quality and reliability. It is particularly well-suited for SMEs and manufacturers who are new to TPE processing, as it offers easy operation and low maintenance requirements.
ZTE Model Parameters
Consistent with its cost-effective and practical positioning, the ZTE series is designed with simple and practical parameters, which can fully meet the basic processing needs of most general TPE materials. For small and medium-sized enterprises and manufacturers new to TPE processing, the parameters listed below are easy to match with production needs, while ensuring low maintenance costs and stable operation.
With excellent cost performance, the ZTE series has simple and practical parameters, suitable for most general TPE materials, and is the preferred choice for small and medium-sized enterprises with basic production needs.
| Mohlala | Torque e khethehileng (N.m/Cm³) | Matla a motlakase (Kw) | Lebelo la tlhahiso (rpm) | Slot depth ratio D0/Di |
|---|---|---|---|---|
| 25 | 6 | 7.5 | 600 | 1.55 |
| 35 | 6 | 18.5 | 600 | 1.55 |
| 50 | 6 | 55 | 600 | 1.55/1.68 |
| 65 | 6 | 110 | 600 | 1.55/1.68 |
| 75 | 6 | 160 | 600 | 1.55/1.68 |
| 95 | 6 | 300 | 600 | 1.55/1.68 |
4.5 HTE Series – High-performance, Cost-effective Extruders
The HTE series is designed to bridge the gap between the high-end HTS series and the cost-effective ZTE series, combining high performance with high cost-effectiveness. This series is specifically engineered to reduce energy consumption while delivering higher output, making it an excellent choice for manufacturers who require both performance and efficiency.
Key features of the HTE series include:
- Combines high performance with high cost-effectiveness
- Reduced energy consumption with higher output
- Reasonable torque and power configuration for stable and efficient production
- Dual-speed options for partial models, expanding the application range
- Suitable for processing a wide range of TPEs, including TPS, TPO, TPU, and TPV
- Ideal for medium to high-volume production of TPE components, such as wire and cable insulation and jacketing
The HTE series is an excellent choice for manufacturers who require higher performance than the ZTE series, but do not need the ultra-high performance of the HTS SUPER series. It offers a balance of performance, bokgabane, le ho boloka litšenyehelo, making it a versatile solution for a wide range of TPE processing applications.
HTE Model Parameters
Bridging the gap between the HTS series and ZTE series, the HTE series integrates high performance and cost-effectiveness. Its reasonable torque and power configuration, as well as the dual-speed options supported by some models, effectively achieve energy saving and high output. The specific parameters below fully reflect this balance, making it suitable for medium to high-volume production scenarios such as wire and cable insulation and jacketing.
Combining high performance and cost-effectiveness, the HTE series has reasonable torque and power configuration, partial models support dual-speed options, and achieves energy saving and high output.
| Mohlala | Torque e khethehileng (N.m/Cm³) | Matla a motlakase (Kw) | Lebelo la tlhahiso (rpm) | Slot depth ratio D0/Di |
|---|---|---|---|---|
| 25 | 9 | 11 | 600 | 1.55 |
| 35 | 9 | 30 | 600 | 1.55 |
| 35 | 9 | 45 | 1000 | 1.55 |
| 50 | 9 | 75 | 600 | 1.55/1.68 |
| 50 | 9 | 110 | 900 | 1.55/1.68 |
| 65 | 9 | 160 | 600 | 1.55/1.68 |
| 65 | 9 | 220 | 900 | 1.55/1.68 |
| 75 | 9 | 250 | 600 | 1.55/1.68 |
| 75 | 9 | 315 | 900 | 1.55/1.68 |
| 95 | 9 | 400 | 600 | 1.55/1.68 |
5. Qetello
Thermoplastic elastomers (TPEs) have become an indispensable class of materials in modern manufacturing, offering a unique combination of thermoplastic processability and elastomeric flexibility. From automotive and electronics to construction and consumer goods, TPEs are enabling innovation and improving the performance of products across multiple sectors. Ho sebelisa melemo ea TPE ka botlalo, manufacturers require specialized extrusion equipment that can handle the unique challenges of these materials, ho kenyeletsa le kutlo ea bona mochesong, sekhahla sa ho kuta, le ho kopanya ho tšoana.
Zhuoyue’s comprehensive range of co-rotating parallel twin-screw extruders, including the HTS, ZTE, and HTE series, are specifically engineered for TPE processing, delivering unmatched performance, bokgabane, le ho tšepahala. With advanced features such as the ZG series high-efficiency gearboxes, optimized screw meralo, and precise temperature control systems, Zhuoyue’s extruders ensure uniform mixing, consistent material properties, le tlhahiso e phahameng, empowering manufacturers to unlock the full potential of TPEs.
Whether you require high-end, high-performance extruders for demanding TPE applications (HTS series), cost-effective solutions for general-purpose applications (ZTE series), or a balance of performance and efficiency (HTE series), Zhuoyue has the perfect extrusion solution for your needs. With a deep understanding of TPE material properties and industry application needs, Zhuoyue is committed to providing advanced extrusion technology and comprehensive support to help manufacturers succeed in the competitive global market.