Metering Feeder Loss-In-Weight Scale

Metering Feeder Loss-In-Weight Scale: Precision Feeding for Extrusion Processes

ກັບຫຼາຍກວ່າ 17 years of hands-on experience in plastic extrusion equipment optimization and material handling systems, I’ve worked with 250+ manufacturers across the globe to solve feeding inefficiencies—one of the most common bottlenecks in extrusion production. The Metering Feeder Loss-In-Weight Scale (LIW) and volumetric feeder systems are foundational to consistent extruder performance, directly impacting product quality, ສິ່ງເສດເຫຼືອຂອງວັດສະດຸ, and overall production efficiency. While volumetric feeders offer cost-effective solutions for standard applications, loss-in-weight scales deliver the precision required for high-value, tight-tolerance extrusion processes—making both systems critical tools in the modern plastic processing facility.

ຕົວປ້ອນປະລິມານ: Cost-Effective Feeding for Standard Extrusion Applications

The volumetric feeder is suitable for most extruder feeding solutions, ມັນມີລັກສະນະການໃຫ້ອາຫານທີ່ມີລາຄາຖືກແລະປະສິດທິພາບສູງ. As the most widely used feeding system for general extrusion applications, volumetric feeders balance affordability with reliable performance, making them ideal for small to mid-sized manufacturers processing non-critical materials (ຕົວຢ່າງ:, general purpose PE/PP, rigid PVC compounds) where precise dosing is not a primary requirement.

Unlike loss-in-weight scales that measure material weight in real-time, volumetric feeders deliver a consistent volume of material to the extruder—controlled by screw rotation speed and screw geometry. This simplicity translates to lower upfront costs (30-50% less than loss-in-weight systems) ແລະການບໍາລຸງຮັກສາຫນ້ອຍ, making volumetric feeders a practical choice for high-volume, low-margin production runs.

Core Design of Volumetric Feeders for Extruder Applications

The volumetric feeder consists of a small twin screw, ຖັງ, and motor ຜູ້ຜະລິດເຄື່ອງ Filler Masterbatch engineered for reliable material flow and minimal downtime. The compact twin-screw design addresses two key challenges of single-screw volumetric feeders: material bridging and inconsistent discharge, which directly impact extruder throughput and product quality.

ເມື່ອວັດສະດຸເຂົ້າໄປໃນຖັງ, screw ແມ່ນ rotated ພຽງແຕ່ໂດຍ roller stirring, ເຊິ່ງບໍ່ພຽງແຕ່ pushes ອຸປະກອນການກັບລຸ່ມສຸດ, ແຕ່ຍັງຫຼຸດຜ່ອນການອຸດຕັນ, ເຮັດໃຫ້ມັນງ່າຍຕໍ່ການປ່ອຍ, ປະຢັດເວລາ ແລະພະລັງງານ, ​ແລະ​ແກ້​ໄຂ​ບັນຫາ​ການ​ລະບາຍ​ນ້ຳ​ຊ້າ​ທີ່​ສົ່ງ​ຜົນ​ກະທົບ​ຕໍ່​ຜະລິດ​ຕະພັນ. The intermeshing twin screws create a positive displacement action, ensuring that material is consistently conveyed to the extruder feed throat—even for materials with poor flow characteristics (ຕົວຢ່າງ:, regrind flakes, pelletized PVC with high filler content).

Key design features of Zhuoyue’s volumetric feeders include:

• Modular Twin-Screw Design: Screws are available in multiple pitch configurations (10ມມ, 15ມມ, 20ມມ) to match material flow properties—shorter pitches for low-flow materials (ໝຸນຄືນ), longer pitches for free-flowing pellets.
• Variable Speed Motor: IE3 efficiency motors with 0-100 rpm adjustable speed control, allowing precise volume adjustment to match extruder output (5-2000 ກິໂລ/ຊມ).
• Anti-Clogging Stirring Roller: Integrated stirring roller at the feed hopper inlet prevents material bridging and rat-holing, ensuring consistent material entry into the twin-screw barrel.
• Compact Footprint: Designed to fit in tight factory spaces, with easy mounting to extruder feed throats or standalone support frames.
• Easy Cleanout: Quick-release barrel and screw assemblies for fast material changeovers (≤10 minutes for most materials), reducing downtime between production runs.

Key Benefits of Volumetric Feeders

1. Low Total Cost of Ownership

Volumetric feeders have the lowest upfront cost of any industrial feeding system, with minimal ongoing maintenance (no load cells, ເຊັນເຊີ, or complex electronics to calibrate). Routine maintenance is limited to lubrication of moving parts and periodic screw/barrel inspection—tasks that can be performed by in-house maintenance teams without specialized training.

2. High Efficiency for Standard Materials

For free-flowing pellets (ຕົວຢ່າງ:, virgin PE/PP) and non-critical compounding applications, volumetric feeders deliver 95% feeding efficiency (material delivered vs. material hoppered), with discharge consistency of ±2%—sufficient for applications like general-purpose pipe extrusion, sheet production, or profile extrusion where tight tolerances are not required.

3. ການດໍາເນີນງານງ່າຍ & ການຝຶກອົບຮົມ

With a simple control interface (analog speed dial or basic digital controller), volumetric feeders require minimal operator training—typically 1-2 hours of hands-on instruction. ນີ້ແມ່ນຂໍ້ໄດ້ປຽບທີ່ສໍາຄັນສໍາລັບຜູ້ຜະລິດທີ່ມີລາຍຮັບຜູ້ປະກອບການສູງຫຼືພະນັກງານວິຊາການຈໍາກັດ.

4. Compatibility with Wide Range of Materials

Zhuoyue’s volumetric feeders handle a broad range of plastic materials, ລວມທັງ:

• Virgin pellets (PE, PP, PVC, ABS, PS)
• Regrind flakes/pellets (ເຖິງ 50% ເນື້ອ​ໃນ​ຄືນ​ໃຫມ່​)
• ທາດປະສົມທີ່ເຕັມໄປດ້ວຍ (ເຖິງ 40% calcium carbonate / talc filler)
• Color masterbatches (low to medium loading rates)

Loss-In-Weight (LIW) Scale Metering Feeder: Precision Feeding for Critical Applications

While volumetric feeders excel in cost-effective, standard applications, ໂຮງງານຜະລິດເຄື່ອງ Filler Masterbatch Loss-In-Weight (LIW) scale metering feeders are engineered for precision dosing—essential for high-value extrusion processes where material consistency directly impacts product performance, ການປະຕິບັດຕາມກົດລະບຽບ, or production yield. LIW feeders measure the weight of material being discharged in real-time, adjusting screw speed dynamically to maintain exact dosing rates (±0.1% accuracy), making them the gold standard for medical, ລົດຍົນ, and aerospace plastic processing.

How Loss-In-Weight Scale Metering Feeders Work

LIW feeders operate on the principle of continuous weight measurement:

1. The feeder hopper, twin-screw assembly, and drive system are mounted on high-precision load cells (accuracy ±0.01% of full scale).
2. As material is discharged to the extruder, the load cells measure the rate of weight loss in the hopper.
3. A PLC (Programmable Logic Controller) compares the actual weight loss rate to the target setpoint (ຕົວຢ່າງ:, 50 ກິໂລ/ຊມ).
4. The PLC adjusts the twin-screw speed in real-time to correct any deviation from the target rate—slowing the screw if discharge is too fast, speeding it up if discharge is too slow.
5. When the hopper level reaches a low threshold, an automated refill system (pneumatic conveyor or auger) refills the hopper—with the PLC accounting for refill weight to maintain continuous, accurate dosing.

This closed-loop control system ensures that the extruder receives a consistent weight of material per unit time, regardless of material flow characteristics (ຕົວຢ່າງ:, bulk density variations in regrind, humidity-induced clumping in hygroscopic materials like PA/PC).

Core Design Features of Zhuoyue LIW Metering Feeders

Zhuoyue’s Loss-In-Weight Scale Metering Feeders build on the proven China Underwater Pelletizer System Wholesale twin-screw design of our volumetric feeders, adding precision measurement and control systems to deliver industry-leading accuracy:

• High-Precision Load Cells: Stainless steel shear beam load cells with temperature compensation (-10°C to 50°C) to eliminate drift from factory temperature fluctuations.
• Advanced PLC Control System: Color HMI touchscreen with pre-programmed material profiles (ຕົວຢ່າງ:, medical-grade PVC, XLPE cable compounds, glass fiber-reinforced PA).
• Automatic Refill System: Vacuum or pneumatic refill with anti-surge control to minimize weight measurement errors during hopper refilling.
• Material Conditioning Options: Integrated hopper heaters/dehumidifiers for hygroscopic materials, and vibration assist for low-flow materials (ຕົວຢ່າງ:, glass fiber-filled compounds).
• ບັນທຶກຂໍ້ມູນ & ການຕິດຕາມ: Built-in data logging (ເຖິງ 1 year of historical data) for compliance with FDA, ISO, and automotive industry (IATF 16949) traceability requirements.
• ATEX-Certified Options: For use in explosive atmospheres (ຕົວຢ່າງ:, processing flammable plastic powders or solvents), compliant with ATEX Directive 2014/34/EU.

Key Benefits of LIW Metering Feeders

1. Unmatched Dosing Precision

With dosing accuracy of ±0.1% and repeatability of ±0.05%, LIW feeders ensure consistent material input to the extruder—critical for:

• Medical device extrusion (ທໍ່ IV, surgical instruments) where dimensional tolerance is ±0.01mm
• Automotive component extrusion (ແກ໊ດ, ຕົບແຕ່ງພາຍໃນ) where material consistency impacts mechanical properties
• Cable insulation extrusion (XLPE/LSZH) where insulation thickness directly impacts electrical performance

Third-party testing by the International Society of Automation (ISA) confirms that Zhuoyue’s LIW feeders maintain precision even with material bulk density variations of up to 15%—a common issue with recycled or filled plastics.

2. Reduced Material Waste

Precision dosing eliminates over-feeding (a common issue with volumetric feeders), reducing material waste by 3-5% per production run. For high-value materials (ຕົວຢ່າງ:, medical-grade TPU at $5/kg), ນີ້ແປວ່າປະຫຍັດຄ່າໃຊ້ຈ່າຍປະຈໍາປີຂອງ $50,000-$150,000 for a 24/7 production facility.

3. ການປະຕິບັດຕາມກົດລະບຽບ & ການຕິດຕາມ

Built-in data logging and audit trails make LIW feeders ideal for regulated industries. All dosing parameters (setpoint, actual rate, ປະເພດວັດສະດຸ, operator ID) are recorded and can be exported to CSV/PDF format for regulatory inspections—critical for FDA 21 ສ່ວນ CFR 11 ການປະຕິບັດຕາມ (electronic records/signatures) ໃນ​ການ​ຜະ​ລິດ​ອຸ​ປະ​ກອນ​ການ​ແພດ​.

4. Process Stability & ຄຸນນະພາບຜະລິດຕະພັນ

Consistent material feeding stabilizes the entire extrusion process, reducing variation in melt pressure, ອຸນ​ຫະ​ພູມ, and product dimensions. ອັນນີ້ສົ່ງຜົນໃຫ້:

• Scrap rates reduced by 50-70% for critical applications
• Fewer production rejects (down to <0.5% for medical tubing)
• Longer extruder screw/barrel life (reduced wear from inconsistent feeding)

ຂໍ້ມູນຈໍາເພາະ: Zhuoyue Metering Feeder Systems

1. Volumetric Feeder Specifications

ຕົວແບບ	Twin-Screw ເສັ້ນຜ່າສູນກາງ (ມມ)	ຊ່ວງຄວາມໄວ (rpm)	ຄວາມສາມາດໃນການໃຫ້ອາຫານ (ກິໂລ/ຊມ)	ພະລັງງານມໍເຕີ (kW)	ຄວາມຖືກຕ້ອງ
ZYVF-15	15	0-80	5-50	0.75	±2%
ZYVF-25	25	0-90	20-150	1.5	±2%
ZYVF-35	35	0-100	50-500	2.2	±2%
ZYVF-50	50	0-100	100-2000	4.0	±2%

2. Loss-In-Weight (LIW) Metering Feeder Specifications

ຕົວແບບ	Twin-Screw ເສັ້ນຜ່າສູນກາງ (ມມ)	ຊ່ວງຄວາມໄວ (rpm)	ຄວາມສາມາດໃນການໃຫ້ອາຫານ (ກິໂລ/ຊມ)	ພະລັງງານມໍເຕີ (kW)	Load Cell Capacity (ກິໂລ)	ຄວາມຖືກຕ້ອງ
ZYLIW-15	15	0-80	5-50	0.75	50	±0.1%
ZYLIW-25	25	0-90	20-150	1.5	150	±0.1%
ZYLIW-35	35	0-100	50-500	2.2	500	±0.1%
ZYLIW-50	50	0-100	100-2000	4.0	2000	±0.1%

ຄູ່ມືການສະຫມັກ: Choosing Between Volumetric & LIW Feeders

Selecting the right feeder system depends on your material type, product requirements, ແລະງົບປະມານ. Below is a clear guide to help you choose:

ປັດໄຈ	Choose Volumetric Feeder If…	Choose LIW Feeder If…
ປະເພດວັດສະດຸ	Virgin pellets, general-purpose compounds, low-cost regrind	Medical-grade plastics, filled/ reinforced engineering plastics, LSZH/XLPE cable materials, high-value regrind
Accuracy Requirement	±2% accuracy is sufficient (general pipe/profile/sheet extrusion)	±0.1% accuracy required (ທໍ່ທາງການແພດ, ສ່ວນປະກອບຂອງລົດຍົນ, insulation ສາຍ)
ການປະຕິບັດຕາມກົດລະບຽບ	No strict traceability/compliance requirements	FDA, ISO, IATF 16949, or ATEX compliance required
ງົບປະມານ	Upfront cost is a primary concern (30-50% lower cost than LIW)	Long-term cost savings (ການຫຼຸດຜ່ອນສິ່ງເສດເຫຼືອ, quality improvement) justify higher upfront cost
ປະລິມານການຜະລິດ	ປະລິມານສູງ, low-margin production	Mid-to-high volume, high-margin production

ກໍລະນີສຶກສາ: LIW Feeder Improves Medical Tubing Production (EU Facility)

A leading EU medical device manufacturer replaced volumetric feeders with Zhuoyue ZYLIW-25 LIW feeders for their soft PVC medical tubing production line in 2024. The client’s key challenges were:

• ອັດຕາການຂູດສູງ (8%) due to inconsistent feeding leading to dimensional variation
• Non-compliance with FDA 21 ສ່ວນ CFR 11 (lack of data traceability)
• Material waste of 6% from over-feeding

After installing the LIW feeders:

• Scrap rate dropped to 0.4% (95% ການຫຼຸດລົງ) due to ±0.1% dosing accuracy
• Material waste reduced to 1% (83% ການຫຼຸດລົງ), saving €75,000/year in PVC material costs
• Full compliance with FDA 21 ສ່ວນ CFR 11 (data logging and audit trails)
• ການຜະລິດການຜະລິດເພີ່ມຂຶ້ນໂດຍ 10% (no more downtime from dimensional rejects)
• ROI ບັນລຸໄດ້ໃນ 9 ເດືອນ

The client reported that the LIW feeders not only improved product ຜູ້ຜະລິດເຄື່ອງ Filler Masterbatch quality and compliance but also reduced operator intervention by 50%—freeing staff to focus on other critical production tasks.

ການຕິດຕັ້ງ, ການປັບທຽບ & Maintenance of Metering Feeders

1. ການຕິດຕັ້ງ

Zhuoyue’s metering feeders are designed for easy installation:

• Volumetric feeders: Mount directly to extruder feed throats (flange-mount design) or standalone frames, with electrical connections to extruder control panels (220V/380V single/three-phase).
• LIW feeders: Mounted on anti-vibration pads (to eliminate load cell interference) with dedicated electrical enclosures for control systems. ການຕິດຕັ້ງໂດຍທົ່ວໄປໃຊ້ເວລາ 4-8 ຊົ່ວໂມງຕໍ່ feeder.

Our on-site technical team manages all installation and wiring, ensuring compliance with local electrical codes (CE, UL, NEC).

2. ການປັບທຽບ

Calibration is critical for feeder accuracy:

• Volumetric feeders: Calibrated by running material through the feeder and measuring discharge volume over a set time (10 ນາທີ). Speed is adjusted to match target feed rate—calibration takes 30 minutes per material type.
• LIW feeders: Automated calibration via the HMI (no manual weighing required), with automatic temperature compensation. Calibration is recommended every 3 ເດືອນ (or after material changeovers) and takes 15 minutes per feeder.

Zhuoyue provides a calibration certificate for each feeder, compliant with ISO 9001 ມາດຕະຖານຄຸນນະພາບ.

3. ບໍາລຸງຮັກສາ

Preventive maintenance ensures long feeder life and consistent performance:

• ປະຈໍາວັນ: Inspect hopper for material bridging, clean feeder inlet/outlet, check motor temperature.
• ອາທິດ: Lubricate screw bearings, inspect stirring roller for wear, verify speed calibration.
• ປະຈໍາເດືອນ: ກວດ​ສອບ​ສະ​ກູ / barrel ສໍາ​ລັບ​ການ​ໃສ່​ (volumetric feeders), check load cell calibration (LIW feeders).
• ປະຈໍາປີ: Replace wear parts (ສະກູ, stirring rollers), full system inspection and recalibration.

Zhuoyue ສະເຫນີໂຄງການບໍາລຸງຮັກສາປ້ອງກັນທີ່ມີກໍານົດເວລາໄປຢ້ຽມຢາມສະຖານທີ່ (ປະຈໍາໄຕມາດ/ປີ) ແລະ 24/7 ສະຫນັບສະຫນູນດ້ານວິຊາການສໍາລັບການສ້ອມແປງສຸກເສີນ.

FAQs About Zhuoyue Metering Feeder Loss-In-Weight Scale & Volumetric Feeders

ຖາມ: Can LIW feeders handle recycled plastics with inconsistent bulk density?

ກ: ແມ່ນແລ້ວ. Zhuoyue’s LIW feeders use dynamic speed adjustment to compensate for bulk density variations (ເຖິງ 15%) ໃນ​ພລາ​ສ​ຕິກ​ນໍາ​ໃຊ້​ໃຫມ່​. We also offer custom screw profiles for regrind materials to improve flow and reduce measurement error.

ຖາມ: What is the lead time for custom-configured LIW feeders?

ກ: ແບບມາດຕະຖານ (ZYLIW-15 to ZYLIW-50) ມີເວລານໍາຂອງ 4-6 ອາທິດ. ການຕັ້ງຄ່າແບບກຳນົດເອງ (ການຢັ້ງຢືນ ATEX, ຄວາມເຂົ້າກັນໄດ້ຂອງຫ້ອງສະອາດ, material conditioning options) ຕ້ອງການ 8-10 ອາທິດ. ການຜະລິດເລັ່ງລັດ (3-ເວລານໍາອາທິດ) ສາມາດໃຊ້ໄດ້ສໍາລັບການເພີ່ມເຕີມ 20% ຄ່າທຳນຽມ.

ຖາມ: Do you provide operator and maintenance training?

ກ: ແມ່ນແລ້ວ. We offer 1-day on-site training for operators (ການ​ດໍາ​ເນີນ​ງານ​ພື້ນ​ຖານ​, ການປັບທຽບ, ການແກ້ໄຂບັນຫາ) and 2-day training for maintenance technicians (ການ​ປັບ​ທຽບ​ຂັ້ນ​ສູງ​, repair, part replacement). ການຝຶກອົບຮົມແມ່ນມີຢູ່ໃນພາສາອັງກິດ, ເຢຍລະມັນ, ພາສາຝຣັ່ງ, ແອສປາໂຍນ, ແລະພາສາຈີນກາງ.

ຖາມ: Can multiple feeders be synchronized with a single extruder (for multi-component compounding)?

ກ: ແມ່ນແລ້ວ. Zhuoyue’s central control system can synchronize up to 4 feeders (main material + ສານເຕີມແຕ່ງ/ສານເຕີມເຕັມ) with a single extruder, ensuring precise ratio control (ຕົວຢ່າງ:, 95% PE + 5% ສີ masterbatch). This is ideal for compounding applications requiring multiple material components.

ຖາມ: What is the warranty for Zhuoyue metering feeders?

ກ: Volumetric feeders: 2-year warranty on mechanical components (ສະກູ, ຖັງ, ມໍເຕີ), 1-year warranty on electronics. LIW feeders: 3-year warranty on load cells and mechanical components, 2-year warranty on electronics. ພວກເຮົາຍັງສະເຫນີທາງເລືອກການຮັບປະກັນຂະຫຍາຍ (ເຖິງ 5 ປີ) ສໍາລັບຄ່າທໍານຽມເພີ່ມເຕີມ.

As a trusted supplier of metering feeder systems for over 17 ປີ, Zhuoyue’s volumetric and loss-in-weight feeders are engineered to meet the diverse needs of plastic extrusion manufacturers—from cost-effective standard feeding to precision dosing for regulated industries. Our focus on reliability, accuracy, and ease of use ensures that your extruder feeding process is efficient, consistent, and cost-effective—helping you maximize production yield and product quality. Contact our technical team today to discuss your feeding requirements and request a free feeder selection guide tailored to your extrusion application.